Table of Contents
Advertisement
16-830.fm Page 31 Wednesday, July 21, 1999 9:32 AM
4. Insert a cassette into the camcorder.
5. Press
on the camcorder to play the
PLAY
tape to the point where you want audio/
video dubbing to end. Then press
to pause it.
PAUSE
6. Press
.
DISPLAY
M
finder next to the tape counter. Then press
to reset the tape counter to
RESET
7. Press
to rewind the tape past the
REWIND
point where you want to start audio/video
dubbing, then press
the point of the tape where you want to
start audio/video dubbing, press
.
PAUSE
8. Press
and
PLAY
DUBBING AUDIO/VIDEO
together twice.
are dubbing appear in the viewfinder.
Note: If you accidentally press
DUBBING
AUDIO/VIDEO
once,
appears in the viewfinder
instead. If this happens, simply press
and
DUBBING AUDIO/VIDEO
REC/
appears in the view-
0000
.
. When you see
PLAY
REC/
10. Press
and the picture you
and
PLAY
together
only
PLAY
together again.
9. Press
on
REC/PAUSE
Audio/video dubbing begins.
When the tape counter shows
camcorder automatically stops the tape,
and video and audio dubbing stop.
Notes:
• To protect the tape and conserve battery
power,
the
camcorder
stops and turns itself off if left in the
record/pause mode for more than 5 min-
utes.
• To prevent feedback squeals, turn down
the volume control on any TV or TV/
monitor connected to the camcorder.
on the camcorder to
STOP/EJECT
stop audio/video dubbing at any time.
the
camcorder.
, the
0000
automatically
31
Advertisement
Table of Contents
