Table of Contents
Advertisement
Install software
GoGear Opus comes with the following
software:
Philips Device Manager (helps you get
Media Converter for Philips (helps
GoGear Opus)
Windows Media Player(helps you
convert and transver music and picture
Important:
Remember to install the software provided in
the supplied CD-ROM for music and/or video
transfer.
Important: Before installing the software,
check that your computer meets the
requirements (see section System
requirements in this user manual).
1
Connect GoGear Opus to your
computer.
2
Insert the CD that comes with GoGear
Opus into the CD-ROM drive of your
computer.
3
Follow the on-screen instructions to
complete the installation of the software.
If the installation program fails to start
automatically:
1
Browse the CD contents with Internet
Explorer.
2
8
EN
Connect and charge
GoGear Opus has a built-in battery that can be
charged through the USB port of a computer
(USB cable included).
Note
charge for 3 hours.
The charging animation stops and the
icon is displayed when the charging process is
completed.
Connect GoGear Opus to a
computer
1
Connect the USB plug of the supplied
USB cable to a spare USB port on your
computer.
2
Connect the small USB plug of the USB
cable to the small USB jack on GoGear
Opus.
3
Turn on your computer.
»
GoGear Opus charges.
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100%
75%
50%
»
the battery is low. The player saves
all settings and switches off within 60
seconds.
25%
0%
Advertisement
Table of Contents
