Aurora Design BT-2 User's Operation Manual

Bluetooth/aac adapter

Download this manual

Enlarged version

Note: seek-button refers to the Wonderbar or Town & Country button on a

signal seeking radio. In AM/FM mode this button will only control the

radio seek function, not the Bluetooth/USB.

Bluetooth® is a registered trademark of the Bluetooth SIG

AAC trademark used under license from Via Licensing

All other trademarks are those of their respective owners

Aurora Design

BT-2

Bluetooth/AAC Adapter

User Operation

Manual

Need help?

Do you have a question about the BT-2 and is the answer not in the manual?

Page 1 In AM/FM mode this button will only control the radio seek function, not the Bluetooth/USB. Bluetooth® is a registered trademark of the Bluetooth SIG AAC trademark used under license from Via Licensing All other trademarks are those of their respective owners Aurora Design LLC. ©2014-16 Rev 2.2 9/16...
Page 2 -40C to 125C (-40F to 257F) Storage Humidity: 10% to 90% non-condensing Aurora Design LLC. does not assume any responsibility for personal injury or property damage incurred due to hazardous driving as a result of interaction with the BT-2 or other Bluetooth devices.
Page 3: Troubleshooting
(see FMR-2 manual for more information on status LED) When • Consult the dealer or an experienced radio/TV technician for help. you stop streaming music or end a call, the BT-2 will put the FMR-2 back into normal operation. Everything is handled automatically.
Page 4 When the audio is paused, the FMR-2 status LED will Bluetooth section of your device. (x.x represents the version) Select the blink slowly. If the audio is paused for more than about 10 seconds, the BT-2 BT-2 to connect. (refer to the owners manual for your Bluetooth device for will release the FMR-2 and it will switch back to normal radio operation.