Subscribe to Our Youtube Channel
Summary of Contents for Furukawa electric FITELwave AG20E (L)
- Page 1 INSTRUCTION MANUAL For F TELwave AG1600 Series ＯＮＵ EQUIPMENT ＜FITELwave AG20E（L）＞ FURUKAWA ELECTRIC CO., LTD. 330-B1272-AH01...
- Page 2 INTRODUCTION Thank you for purchasing the GE-PON ONU Equipment made by Furukawa Electric Co., Ltd. This instruction manual describes the basic operations of the ONU Equipment. Read the instruction manual carefully before operating the equipment for proper use of the unit. Store this manual for later reference as needed.
-
Page 3: Proper Use Of The Product
PROPER USE OF THE PRODUCT The instructions below show important matters for safe use of this equipment. Read the instructions carefully before using the equipment. Indicates an urgent situation wherein failure to heed the instructions or improper WARNING use of the product may result in death or serious injury. Indicates an urgent situation wherein failure to heed the instructions or improper CAUTION use of the product may result in minor injuries or physical damage. -
Page 4: Checking The Contents Of The Package
CAUTION ・Follow the instructions shown in this manual and install the equipment properly. ・Do not install the equipment near a heat source. ・Do not install the equipment in a vibrating, slanted, or unstable location. ・Do not install the equipment near equipment generating strong magnetic fields, such as a motor. ・Do not block the vent holes of the equipment. - Page 5 LAMP NAMES AND FUNCTIONS ① ② ③ ④ ⑤ ⑥ Indication Lamp name Function Remark Color Status ①P0WER Green Normal running status (Power on)) No power is supplied. (Power off) ②SYSTEM Green Normal running status Green Blinks Equipment is standing by or erroneous. Green/ Blinks Equipment is faulty.
- Page 6 LAN 2 sending/receiving data at 10/100 Mbps . Green Blinks LAN 2 is not connected or linked down. *1: Contact the dealer if this status continues for some while. *2: Contact the dealer. BEFORE USING PRODUCT (1) Preparation for installation Stick the anti-slip rubber.
- Page 7 (2) Connection The user need not adjust any settings after installing the equipment. Connect the cables as shown below and use the equipment. ・Plug the AC adapter into the AC outlet (100 VAC). ・Insert the modular RJ-45 plugs of the LAN cables into the LAN 1 and LAN 2 RJ-45 modular jacks on the rear panel.
- Page 8 (3) Caution Do not install this equipment in a closed place. Leave a space of 20 mm or more around it. 330-B1272-AH01...
-
Page 9: Troubleshooting
(4) Check Make sure that the lamps on the equipment are in the following condition after connection. Lamp on equipment Status POWER Lights green. SYSTEM Lights green. PON LINK Lights green. LAN 1(1000 Mbps)* Lights green. (Blinks during communication.) LAN 1(100 Mbps)* Lights green. - Page 10 Use environment Temperature: 0℃ to 40℃, humidity: 30% to 80% condensation Applicable Conforms to VCCI Class B. standard 330-B1272-AH01...
Need help?
Do you have a question about the FITELwave AG20E (L) and is the answer not in the manual?
Questions and answers