Advertisement

Quick Links

Schützenstraße 12
D-58511 Lüdenscheid
Caution!

Safety indications:

1.Before operation it is absolutely necessary to read carefully
this instruction and especially the safety indications.
2. This remote control device is exclusively meant and authori-
zed for the operating of RC-steam models by Wilesco. Wilhelm
Schröder GmbH & Co.KG assumes no liability in case of diffe-
rent use.
3. For safety reasons, children (recommended age: from 12 years on) should
operate this remote control only under supervision of adults.
4. Operating this remote control requires technical knowledge cautious acting. Faults
or carelessness during installation and operation can result in considerable damage to
property or persons.
5. Also operating the receiving device without the radio transmitter online can cause
problems or injuries.
6. In case of abnormal operation it is expressly referred to these dangers, any warranty
expires.
7.Each irregularity during operation must exclusively be repaired by a competent and
authorized person or by WILESCO themselves. Otherwise any warranty expires.
Nonwarranty clause
8. Since it is impossible to control handling, respect of installation and operation hints,
application and maintenance, Wilhelm Schröder Gmbh & Co.KG assumes no liability
for loss, damages or costs. Any claim for compensation resulting from operation,
application or remote damages is refused. No liability is assumed for damages to
persons or property or for consequences.
9. Unless legally admitted and regardless of the cause in law the obligation to
indemnification is limited to the invoice value of the product which is immediately
concerned with the event.
10. It is absolutely necessary to keep this operating instruction.

Operating instructions

forward
backward
only with
supplement Z363
E-Mail: info@wilesco.de
www.wilesco.de
11. Unscrew the cover
of
the
compartment and insert
a
9-V-monobloc
battery. Fix the cover
with the screw and
screw the antenna in the
thread.
12.
Switch
transmitter
(position
on). The LED has to
come up. The right
switch controls the right
right
left
/ left direction, the left
switch
controls
forward
/
backward
direction.
Remote Remote Control Z360
15. The relevant installation instruction is described in the notes of each model (pages
3 - 6).

Use of batteries

16. Non-rechargeable batteries are not to be recharged.
17. Different types of batteries or new and used batteries are not to be mixed.
18. Only batteries of the same or equivalent type as recommended are to be used.
19. Batteries are to be inserted with the correct polarity.
20. Exhausted batteries are to be removed from the toy.
battery
21. Supply terminals are not to be short-circuited.

Telecommunication regulations

22. Please observe the telecommunication regulations in the country in which you
want to drive your model. The user is responsible for the due use of the radio
remote control. Please observe the legal situation in your country.

Indication of waste disposal

23. Environment protection also concerns Wilesco. You have the possibility to return
to us the remote control and also the original packing (freight charges are not
reimboursed). All returned remote controls / packing are professionally recycled. You
can also dispose of the electronic components professionally and according to the legal
prescriptions yourself by taking them to the recycle boxes in your community.
This model is meant for the above described purpose only.
Technical specifications subject to change without prior notice.
on
the
the
only with supplement Z363
13. Unscrew the cover
of
the
battery
compartment
and
insert
2
1,5-V-
batteries type AAA
(observe
correct
polarity +/-). Fix the
cover with the screw.
14.
Only
for
supplementary
set
Z363 to steer forward
and
backward:
connect up the jack
plug.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z360 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wilesco Z360

  • Page 1 Please observe the legal situation in your country. Indication of waste disposal 23. Environment protection also concerns Wilesco. You have the possibility to return to us the remote control and also the original packing (freight charges are not reimboursed).
  • Page 2 Montage Fernsteuerung Z360 für Dampfwalze Old Smoky D365 / D366 / D368 Zusatzblatt zur Bedienungsanleitung / Beides unbedingt aufbewahren? Assembly of the radio remote control Z360 for steam rollers Old Smoky D365 / D366 / D368 Supplement to the manual, please keep both! Demontage der Kettenlenkung Schraube gemäß...
  • Page 3 Montage des Empfängermoduls Das Empfängermodul mit der M2,5-Schraube durch das Loch in dem Schutzblech festschrauben. Hinweis: Zum Batteriewechsel erst diese Schraube lösen und das Empfängermodul aushängen. Nach dem Wechsel wieder wie oben beschrieben befestigen. Assembly of the receiver module Fix the the receiver module through the hole of the protection shield with screw M2,5. Nota: When changing the batteries unsrew this screw at first.
  • Page 4 Montage Fernsteuerung Z360 für Dampftraktor D405/406 und Shoman s Engine D409 Zusatzblatt zur Bedienungsanleitung / Beides unbedingt aufbewahren! Assembly of the radio remote control Z360 for traction engine D495/D496 and Showman s Engine D499 Supplement to the manual, please keep both! Demontage der Kettenlenkung Schraube gemäß...
  • Page 5 Montage des Empfängermoduls Das Empfängermodul mit der M2,5-Schraube durch das Loch in dem Schutzblech festschrauben. Hinweis: Zum Batteriewechsel erst diese Schraube lösen und das Empfängermodul aushängen. Nach dem Wechsel wieder wie oben beschrieben befestigen. Assembly of the receiver module Fix the the receiver module through the hole of the protection shield with screw M2,5. Nota: When changing the batteries unsrew this screw at first.
  • Page 6 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Table of Contents