AmazonBasics B01GF4YAWI Operation Instructions Manual page 4

Operation Instructions
Step 1:
Charging the speaker
1. Plug small end of the USB charging cable into micro USB jack under the rubber USB cover.
2. Plug the other end of the USB charging cable into an available USB port on your computer or a USB power adaptor on wall.
3. Red LED is on in the front of the speaker during charging. When full charged, the LED will go off.
When battery is low, the speaker will have a warning tone.
Note:
Step 2:
Play music through Bluetooth
1. Short press the power button on the speaker. Blue LED is flashes slowly in the front of the speaker.
2. Navigate to your device's Bluetooth settings, turn on Bluetooth, and then search for available devices.
3. Select Paring Name from a list of available devices on your Bluetooth device. The Blue LED turns solid when your device is
paired.
4. Choose the music on your device to play through the speaker.
5. Adjust speaker volume through the + and the – buttons on top of the speaker.
6. To disconnect from the paired Bluetooth device, turn off Bluetooth on your device.
Note:
The maximum Bluetooth range is 33 feet.
1)
Make sure the volume level on your Bluetooth device is at least 50%.
2)
When speaker is turned on, it will try to connect the last paired Bluetooth device automatically within 20s. If the last paired
3)
Bluetooth device is out of range, it will automatically search for another device for pairing.
Step 3:
Using the Speakerphone
When paired to your mobile phone:
1. With a coming call, short press the
2. Press the + or the – button to increase or decrease the speakerphone volume.
3. Short press the
4. Long press the
5. For Android users: make sure that the "Phone Audio" function is active in the Bluetooth settings.
button to answer it.
button again to end the phone call.
button to reject the incoming call.