Page 3
Caution: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
General Information Your FERRET CF2810C is an IP67 rated compact wireless rechargeable inspection camera and palm sized rechargeable 4.3” LCD display designed to help you see in dark confined spaces. The Cable Ferret Company’s commitment to ongoing product and quality improvement means that the specifications are subject to change without notice.
Camera Unit CFC2810C The on/off switch and USB charging socket are located at the back of the camera under the screw-on aluminium cap. To maintain the camera’s IP67 rating, the camera must not be disassembled. There are no user serviceable items inside the camera and disassembly will void the warranty.
Turn On/Off – Slide the switch at the rear of the camera to turn the camera on or off. When turned on the front LEDs will illuminate. Charge – Connect the supplied power supply. While the camera is charging the red LED at the rear will illuminate. Once fully charged the red LED at the rear will turn off.
Page 7
Turn On/Off – To turn on press the button at the top left of the display. To turn off press and hold this button for 3 seconds. Charge – Connect the supplied power supply. While the camera is charging the red LED near the bottom right of the case will illuminate.
Page 8
Playback mode – Press <Menu> from the home screen then press <Ok> while Playback is highlighted. This will provide access to view recorded photos and video without a computer. Note: The SD card can be read by a computer by directly connecting the display unit to the computer using a USB cable.
Page 9
Update Firmware – From time to time software updates will be available on The Cable Ferret web site www.cableferret.com. These updates will provide enhancements to the display. To update the firmware copy the two files downloaded from the web site to an SD card and insert this card into the display. Power on the display, press <Menu>, <Down>, <Ok>, <Up>, <Up>...
Page 10
20mm Conduit Adaptor CFCA20A The FERRET camera can attach securely to a 20mm PVC conduit or ½” EMT conduit with the addition of the CFCA20A conduit adaptor. To use, slide the aluminium conduit adaptor over the end of the conduit, using a 4mm drill bit, drill though the existing holes in the adaptor to put holes through the PVC conduit.
Page 11
Gooseneck CFGN70A Point the FERRET camera in any direction with the addition of the flexible gooseneck. It’s 180mm long (7”) and can attach to either push pull rods or the CFCA20A conduit adaptor. See how it works on www.youtube.com/cableferret Rod/Hook/Magnet CFRHMKA Connect the 180mm (7”) rod to the front of the camera and use the hook or magnet to pull back a cable or retrieve a metallic...
Page 12
SD Memory Card CFSD2GBA Insert the SD card into the FERRET display to enable the recording of photos and video. The 2GB SD card will store up to 10,000 photos or 80 minutes of video. Connect the FERRET display using the supplied USB charging cable direct to a PC or Mac and directly access the SD card.
Rechargeable Battery Pack CFBP5000A (optional accessory) If power is not easily available, the rechargeable battery pack can charge either the camera or display. Charge device mode – Connect to the camera or the display using the lead provided with the battery pack. The battery pack will automatically turn on.
Page 14
Push-pull rods (Fish Sticks) CFPP8R3F (optional accessory) Give your FERRET the extra reach you need with these high quality fiberglass rods/fish sticks. There are 8 x 1m (3’) rods/sticks per tube which means you’ll get up to 8m (24’) of reach.
Page 15
Important Information – Li-Ion Batteries The FERRET display and camera both contain Li-Ion batteries. The optional rechargeable battery pack also contains Li-Ion batteries. For optimal battery life; • Do not store the devices while the batteries are flat. • Do not store devices in temperatures of over 35°C. •...
Warranty Your FERRET comes with a 12 month replacement warranty. In the unlikely event that your FERRET develops a fault within 12 months of purchase, simply return in to your local store with proof of purchase for a replacement. Failure due to physical damage, misuse, neglect, improper use or moisture is not covered.