Table of Contents
Advertisement
Storing Pauses in a Phone Book Entry
To store a number in your Phone Book that contains
pauses:
1. Enter the phone number you want to store (such as
the bank's tele-service phone number).
2. Press the MENU key.
The letter "p" displays in the number, meaning that a
hard pause will occur at that point in the dialing
sequence.
Note: The digits before the "p" dial the tele-service.
The "p" stops the dialing and waits for the tele-
service to prompt you for a number. The number
following the "p" is your account number, PIN, etc.
3. Enter the digits that need to follow the pause (such as
your account number).
4. Store the number in your Phone Book as you normally
would by pressing the OK key and following the
screen prompts.
16
Pause Dialing from a Stored Phone Book Entry
1. Dial the number from the Phone Book.
2. Wait for the appropriate prompt for the number (credit
card number, bank account number, etc.).
3. When prompted, press the
number that follows your hard pause.
"SENDING DTMF" flashed on the display and the
transmitted tone sounds.
Manual Pause Dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you want to
connect to (such as a bank's tele-service phone
number).
2. Press the MENU key to insert a pause.
The phone displays a "p" meaning a pause. Enter the
number to be sent after the pause and then press the
key .
3. After connecting, press the
the additional number at the prompt from the tele-
service.
key to send the DTMF
key again to transmit
17
Advertisement
Table of Contents
