Aldea Domotica Termolink WiFi Instruction Manual

Digital screen indicatingroom temperature and clock. anti-freeze setting 4 customisable programs for each day of the week. ergonomic wall mount. relay output na 5a to 250 vac power 230 vac 50 hz size 120 x 100 x 80 mm

Advertisement

Quick Links

Ref. AD3012
Termolink WiFi
Instructions Manual
Termolink WiFi
(Ref. AD3012)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Termolink WiFi and is the answer not in the manual?

Questions and answers

Summary of Contents for Aldea Domotica Termolink WiFi

  • Page 1 Ref. AD3012 Termolink WiFi Instructions Manual Termolink WiFi (Ref. AD3012)
  • Page 2: Back Plate

    Ref. AD3012 Termolink WiFi DESCRIPTION Digital screen indicatingroom temperature and clock Anti-freeze setting 4 customisable programs for each day of the week Ergonomic wall mount Relay output NA 5A to 250 Vac Power 230 Vac 50 Hz Size 120 x 100 x 80 mm...
  • Page 3: Wall Mount

    Ref. AD3012 Termolink WiFi CONNECTION CONNECTION CONNECTION THERMOSTAT 230 Vca 230 Vca INSTALATION SEQUENCE WALL MOUNT Attach the back plate to the wall passing the boiler wires and the two 230 V mains wires through the openings. Mark and drill the openings on the wall to receive the plastic wall anchors.
  • Page 4: Connect To Internet

    Ref. AD3012 Termolink WiFi CONNECT TO INTERNET Once Termolink is connected to the mains and the heating system, connect it up to the WiFi network in your home. To do this proceed as follows: THE ROUTER Locate the WPS button of the router. To connect the...
  • Page 5: Main Screen

    Ref. AD3012 Termolink WiFi INSTRUCTIONS ON HOW THE THERMOSTAT FUNCTIONS IN LOCAL MODE MAIN SCREEN Heating on Room Temperature temperature Program Functioning button mode Clock Program cycle Anti-freeze temperature AUTO Day/date and Connectivity CYCLE time display to the internet REMOTE...
  • Page 6 Ref. AD3012 Termolink WiFi RAISING AND LOWERING THE TEMPERATURE In MAN mode, the device works like a normal thermostat. Use button to lower the temperature and the button to AUTO raise it. CYCLE When either of these buttons is pressed,the desired setpoint temperature will be displayed on the screen.
  • Page 7 Ref. AD3012 Termolink WiFi ADJUSTING THE ANTI-FREEZE TEMPERATURE From the main screen, press the button until the icon is displayed. AUTO Then press the OK button to confirm. The screen will display CYCLE the minimum set point temperature. This is the temperature at which the thermostat in automatic mode would start up the heating even though this is not planned.
  • Page 8 Ref. AD3012 Termolink WiFi ALDEA DOMOTICA, S.L. SPAIN info@termostatowifi.com UNITED KINGDOM info@wifithermostat.co.uk FRANCE contactdomotica@gmail.com...

This manual is also suitable for:

Ad3012

Table of Contents