Thank you for purchasing the All in One Wine Pump. We are confident this unit will make racking, bottling, degassing and filtration operations quick, simple and a lot of fun! Family owned and operated, we are dedicated to bringing you a great experience with our quality American-Made product. Customer service is everything to us.
Section 1: Description of the All in One Wine Pump 1.1 What does it do? All in One Racking, Degassing, Bottling & Filtration. Advantages Features Decreases racking time Odorless and oil-free – vacuum wine Better quality wine- less air contact pump ...
Page 4
Note: Before using the All in One Wine Pump, please carefully read all safety information and instructions in this manual. Failure to do so could result in incorrect use of the pump, causing damage to the unit. 1.2 Receiving Your Unit Upon receiving the unit, ensure all pieces are included.
If the overflow container becomes full and wine is sucked into the unit, quickly unplug the pump and contact for us for assistance. Be sure to check your glass vessel for cracks, chips and defects prior to using the All in One Wine Pump. Warranty and Safety Information 3.1 Warranty: ...
2. Attach the other racking cane to the other end of the 3/8” tubing. Connecting the ¼” Tubing with Vacuum Release Valve The All in One Wine Pump uses a color coded system to make set-up a snap. Following this system will ensure the unit is set-up correctly.
3.2 Cleaning and Sanitizing Prior to using the unit, the hoses, racking canes and anything touching the wine will need to be sanitized. We recommend using a no-rinse sanitizer such as Star-San (follow manufacturer’s instructions for use.) *Or you can make a sulfite/ citric acid solution. A.
Page 9
All in One Wine Pump vessel to the empty one. 8. With the installation of the vacuum The All in One Wine Pump makes it very control valve (sold separately,) you can simple for you transfer your wine. With this unit,...
Page 10
One Wine Pump immediately activate the vacuum release valve to stop the flow. Remove the bung The All in One Wine Pump makes it very racking assembly, top up your barrel or simple for you transfer your wine from any keg as needed and replace you airlock or vessel to an oak barrel or sanke keg.
3.5 Bottling Wine with the All in the bucket or carboy and remove the One Wine Pump GREEN bottle filler assembly. 10. Continue to hold in the vacuum 1. Place your full vessel of wine lower release button as you move between than the surface you are bottling (on bottles.
FILTER - 1 MICRON = P1 FILTER - 5 MICRON = P5 Barb fittings (1/4 NPT to 3/8 barb) needed to connect the filter to the All in One Wine Pump along with additional tubing can be found at allinonewinepump.com.
With the addition of an in-line filter to 15. Once the donor carboy is empty, activate your existing All in One Wine Pump set-up, you vacuum release and remove #7.0 bung now have the ability to filter your wine as you racking assembly from the receiving transfer it from one vessel to another.
Need help?
Do you have a question about the Deluxe and is the answer not in the manual?
Questions and answers