Download Print this page

Signature Origin Signature Century Manual

Ultra-high resolution stereo power amplifier

Advertisement

Quick Links

Signature
Signature Century – Manual.
Ultra-high resolution stereo power amplifier
by Frans de Wit.
Congratulations on purchasing this extremely capable; exquisitely built state-of-the-art
stereo power amplifier. You will have countless hours of enjoyment from this exceptional
device. The operating manual is designed to be as simple as possible so that you can start to
enjoy this revolution in music with minimal delay.
1) Audio (line level) XLR or RCA input left.
2) Audio (line level) XLR or RCA input right.
3) N0X (Non-zero-crossing) socket left.
4) N0X (Non-zero-crossing) socket right.
5) Soft-clipper on/off switch left.
6) Soft-clipper on/off switch right.
7) Mundorf binding-post red (positive signal) left.
8) Mundorf binding-post red (positive signal) right.
9) Mundorf binding-post black (positive signal) left.
10) Mundorf binding-post black (positive signal) right.
11) Mains fuse for amplifier left.
12) Mains fuse for amplifier right.
13) Mains fuse for front panel lighting.
14) Mains fuse for mains on/off controller and protection.
15) Mains switch.
16) Trigger (remote) connector.
17) Mains socket C13, C19 or PowerCON.
18) Amplifier level indicator left.
19) Amplifier level indicator right.
20) Amplifier power supply status left [3 lights].
21) Amplifier power supply status right [3 lights].
22) Mains on/off controller status lights [4 lights].
23) Front panel lighting control key.
24) Front panel lighting controls [4 controls] red, green, blue and amber.
25) Finally.
Home of Signature Quality
Origin

Advertisement

loading
Need help?

Need help?

Do you have a question about the Signature Century and is the answer not in the manual?

Questions and answers

Summary of Contents for Signature Origin Signature Century

  • Page 1 Signature Origin Home of Signature Quality Signature Century – Manual. Ultra-high resolution stereo power amplifier by Frans de Wit. Congratulations on purchasing this extremely capable; exquisitely built state-of-the-art stereo power amplifier. You will have countless hours of enjoyment from this exceptional device.
  • Page 2 Signature Origin Home of Signature Quality Amplifier backside. Amplifier front side. Amplifier top side.
  • Page 3 Signature Origin Home of Signature Quality Amplifier backside. Amplifier front side. Amplifier top side.
  • Page 4 Signature Origin Home of Signature Quality Connecting and controlling your Signature Century amplifier: Audio (line level) XLR or RCA input left/right. 1) 2) The amplifier may be equipped with either XLR or RCA input connectors. This is determined at the time the amplifier is ordered. Later, if required, the amplifier can be re-equipped: XLR can be changed to RCA;...
  • Page 5 7) 8) 9) 10) Mundorf binding-post’s, red (left/right)/black (/left/right). Loudspeakers are connected to the amplifier using these high quality binding-post’s that are custom-made by Mundorf for the Signature Century amplifier. The binding-posts can accommodate the bare cable-ends, 4mm banana plugs and cable-forks. As mentioned before, shielded cables can also be accommodated.
  • Page 6 Signature Origin Home of Signature Quality 13) Mains fuse for front panel lighting. This fuse protects the front-panel lighting power supply, for the 220~240V mains amplifier this will be 1A fuses, for the 110~120V model these will be 2A fuses. 14) Mains fuse for mains on/off controller and protection.
  • Page 7 If no fitting ‘standard’ cable is available then Signature Origin will create a cable and converter for your system, to be able to do this Signature Origin may need technical information about your system, contact your dealer if needed.
  • Page 8 Signature Origin Home of Signature Quality 18) 19) Amplifier level indicator left/right. The front panel of the amplifier contains two VU-meter devices, these measurement instruments are intended to give the user information about the power that is delivered to the loudspeakers. The range of these instruments is 0 to 100%, where 100% (needle to the far right of the VU-meter, marked as 3 on the upper scale) is equivalent to 100 Watts @ 8 Ohm.
  • Page 9 Signature Origin Home of Signature Quality 22) Mains on/off controller status lights [4 lights]. When the amplifier is switched on, and the trigger is not activated, then the amplifiers is in an extreme low power (actually less than 1 Watt) standby mode, this mode will be indicated by the red ([R] most right) on/off-controller status light.
  • Page 10 (or other) information then please contact your dealer. Signature Origin and all its employees wish you many hours of happy and carefree listening.