Page 2
This information to be read and Working Load Limit (WLL) kept for the lifetime of the product Please note that the WLL refers to the in conjunction with the Lyon total combined load on the TRIBUS. General User Instructions. The combined load must not exceed this amount.
Guy Line Point Attachment Point Leg Restraint pendulum fall which may apply loads Leg section (top/ Strap outside the footprint of the TRIBUS, middle/bottom) 10. Foot lock shock load it or destabilise it. Downloaded from lyon.co.uk...
Page 4
The TRIBUS can be used with differential leg adjustments in any combination, e.g. one short leg, two short legs. Ensure that the Head is level. Downloaded from lyon.co.uk...
Page 5
RISK DURING THIS OPERATION. prevent a clear path for the Leg Restraint straps the relevant straps must IF THE HEIGHT OF THE TRIBUS be adjusted such that the stability of the REQUIRES ADJUSTMENT ONCE Downloaded from lyon.co.uk...
Page 6
Leg Restraint protection equipment to the Swivel Strap Attachment Point on the second, Anchor Point using a compatible adjacent leg (see figure below). EN 362 connector. Repeat the process until all legs are linked in a triangle. Downloaded from lyon.co.uk...
Check the security and function of the Leg Restraint Attachment Point, Feet Check that any labels and markings are and Spikes. still intact and readable. Downloaded from lyon.co.uk...
Page 8
Use a liquid lubricant with good adhesion, e.g. light machine oil. Figure shows left pin in good working Apply sparingly and wipe off any excess. condition. The right pin should be Downloaded from lyon.co.uk...
Page 9
A repair service is also offered. Contact the manufacturer for details. Accessories A range of accessories are available for the TRIBUS. See www.lyon.co.uk for information. Materials The body of the TRIBUS is made from stainless steel. The legs are made from aluminium alloy.
Page 10
The table below may be used to record these markings. Part Description of Type of Record here the marking/location marking idN No. TRIBUS Laser-etch on the Head idN No. 5 digit laser-etch at the idN No. bottom of each Leg Downloaded from lyon.co.uk...
Page 11
Guy Point the next three Attachment - not digits the day of an anchor point the year from 001 Product code LPP0041 to 365 and the five digits after is End of document. the number in the series Downloaded from lyon.co.uk...
Page 14
/ dizziness / difficulty with use of any equipment supplied by or balance, heart disease / chest pain, high through Lyon Equipment, use it only for or low blood pressure, impaired limb the purposes for which it is designed,...
Page 15
Maintaining your equipment authorised by Lyon Equipment to make Wash in clean water not exceeding the repair, and in accordance with 30°C with pure soap and rinse in specified procedures.
Page 16
(UV radiation) – list not exhaustive. PPE (Personal Protective Equipment) inspection training is available from Lyon Warning: the safe working life of this Equipment. product may be as short as its first use in extreme circumstances.
Page 17
An example of a suitable equipment record is shown on this user instruction and can also be downloaded at lyon.co.uk Local jurisdiction may dictate that extra information be recorded in the inspection record – check your country’s legal requirements.
Page 18
This page deliberately left blank Downloaded from lyon.co.uk...
Page 19
Explanation of symbols Refer to user instructions Permitted use Caution Danger of death Telephone number Anchor point Rope diameter Cable (Safe Working Load) 250kg Downloaded from lyon.co.uk...