Adjusting Side Panels; Attaching Aprons; Positioning The Table Top - Martelli THE SEWING ESSENTIAL TABLE Assembly Manual

3
4
Loosen knobs and adjust angle to a flat 0°.
Retighten the knobs and insert ringed pin
at the 0° hole.
Attach Apron C to the front of the side
panels with screws provided.The letter
C should be facing outward.
5
Lower the table top into position with the ruler slot over Apron C.
Fasten table top into place with screws provided.
Adjust side panels to 30°
and tighten down knobs.
Attach Apron D to the rear
of the side panels with
screws provided.The letter
D should be facing outward.