Download Print this page

Advertisement

Quick Links

Please read this entire guide before beginning
Important Safety Information
Not for use with aggressive dogs. Do not use this Product if your dog is aggressive, or if your
dog is prone to aggressive behavior. Aggressive dogs
can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate
for your dog, please consult your veterinarian or certified trainer.
Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the
collar is important. A collar worn for too long or made too tight
on the pet's neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is
commonly known as bed sores.
• Avoid leaving the collar on the dog for more than 12 hours per day.
• When possible reposition the collar on the pet's neck every 1 to 2 hours.
• Check the fit to prevent excessive pressure; follow the instructions in this manual.
• Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts.
• When using a separate collar for a lead, don't put pressure on the electronic collar.
• Wash the dog's neck area and the contacts of the collar weekly with a damp cloth.
• Examine the contact area daily for signs of a rash or a sore.
• If a rash or sore is found, discontinue use of the collar until the skin has healed.
• If the condition persists beyond 48 hours, see your veterinarian.
• For additional information on bed sores and pressure necrosis, please visit our website
These steps will help keep your pet safe and comfortable. Millions of pets are comfortable while they wear stainless
steel contacts. Some pets are sensitive to contact pressure. You may find after some time that your pet is very
tolerant of the collar. If so, you may relax some of these precautions. It is important to continue daily checks of the
contact area. If redness or sores are found, discontinue use until the skin has fully healed.
®
PETINCCN
Remote Trainers must be used only on healthy dogs. We recommend that you take your dog to a
veterinarian before using the collar if he is not in good health
Thank you for choosing the PETINCCN
you the tools and techniques to successfully train your pet.You and your pet deserve a companionship
that includes memorable moments and a shared understanding together.
Please charge before using the product.
If the transmitter and receiver collar don't work for a long time, you
should charge it fully before keeping it idle, and charging it every one month.
P680 User Manual
brand. Our mission is to ensure your pet's safety by providing
®

Advertisement

loading

Summary of Contents for PETINCCN P680

  • Page 1 Remote Trainers must be used only on healthy dogs. We recommend that you take your dog to a veterinarian before using the collar if he is not in good health Thank you for choosing the PETINCCN brand. Our mission is to ensure your pet's safety by providing ®...
  • Page 2 Definitions: 1.Antenna:transmit the signal to Receiver Collar 2. LED Indicator:this light wi11 f1ash when transmitter works or when charging ,this light wi11 flash fast. 3. LCD Screen: 0-100 Level: Shows Dog 1 or Dog 2 level of stimulation(Low-0 to High-100) Static shock mode: under this mode ,press "Y"...
  • Page 3: Prepare The Remote Transmitter

    ,press Mode button for more than 3 seconds to activate the transmitter from deep sleep mode The system can be used for 1 or 2 Receiver Collars. Two pairs of metal prong (short/long) to suit dogs with varied fur thickness. Operating Guide Prepare the Remote Transmitter Charge the Remote Transmitter...
  • Page 4: Find The Best Stimulation Level For Your Pet

    6. The Receiver Collar aren't waterproof without the charger covers.So should be keeped the covers in place tightly when not charging. Encode between Remote Transmitter and Receiver Collar: 1.Turn on the Remote Transmitter by holding the Mode Button for 3 seconds or if it 's already turned on. 2.Choose channel 1 or 2.
  • Page 5: Fcc Statement

    ears, indicates the Recognition Level that is best for him. Follow the steps below to find your pet’s Recognition Level: 1. Starting at Level 1 on the Digital Display, press the Stimulation button continuously for 1 to 2 seconds. 2. If your pet shows no reaction, repeat the Stimulation level several times before moving up to the next level. 3.