Agilent Technologies 54831A User's Quick Start Manual page 107

Using the Oscilloscope
To install the printer software
17 If you are using a serial printer, set the baud rate, data bits, parity,
stop bits, and handshake to match the settings for your printer.
If you are using a parallel printer, ensure that the checkbox for
"Spool MS-DOS print jobs" is cleared, and that "Check port state
before printing" is checked.
These dialogs that appear show example settings:
Figure 3-49
Port Configuration Dialogs
18 Click OK to return to the printer port selection dialog box. Then click
Next.
3-64