Read All Instructions Before Using This Machine - Canablast 80 PX Instruction Manual & Parts List

R EAD ALL I N STR U CTI O N S B E F O R E U S I N G TH I S MAC H I N E
1. KEEP THE WORK AREA CLEAN. Cluttered areas invite injuries.
2. CONSIDER WORK AREA ENVIRONMENT. Don't use sandblaster in damp, wet, or poorly
lit locations. Keep work area well lit. Don't use compressors in the presence of flammable
gases or liquids.
3. KEEP CHILDREN AWAY. All children should be kept away from the work area. Don't let
them handle tools, hose or extensions cords, also. No one should be in the area of the
sandblasting if they don't have the same protective equipment you are using.
4. DRESS PROPERLY. Wear protective clothing because a dust and abrasive hazard exists. As
a minimum, wear a hood (included), a dust mask to prevent inhaling the material being
removed, and heavy duty gloves.
5. PERIODICALLY INSPECT THE SAND CARRYING COMPONENTS. These are beingsandblasted
on the inside whenever you use the sandblaster, and will wear mush more rapidly than
components.
6. SECURE THE WORK. Use clamps or a vise to hold the work if it is small or light weight. It's
safer than using your hands and it frees both hands to operate the nozzle.
7. DON'T OVERREACH. Keep proper footing and balance at all times.
8. MAINTAIN TOOLS WITH CARE. Follow instructions for lubricating and changing
components and accessories.
9. DISCONNECT AIR COMPRESSOR POWER when not in use, before servicing and when
changing components.
10. AVOID UNINTENTIONAL STARTING. Be sure the nozzle valve is in the off position when
not in use.
11. STAY ALERT. Watch what you are doing, use common sense. Don't operate any machine or
tool when you are tired.
12. REPLACEMENT PARTS. When servicing, use only identical replacement parts.
2015-08-10
The Reference in Surface Treatment
80PX Instruction manual & Parts
3