Page 2
WARNING! Before carrying out any operations with the unit, carefully read this instruction PHOTOMETRICS manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY Beam Angle: 19° General instruction •...
Page 3
LED Frequency 101-150 2000Hz Operation 151-200 4000Hz Display menu functions 201-255 25KHz DMX functions DMX pin diagram Menu Function Chart DMX Function Chart Photometrics Packing content EPROFILE FC • Mounting bracket • Power cord • Warranty card • User manual...
Value Percent/Setting Dimmer 000-255 0~100% INTRODUCTION 000-255 0~100% Green 000-255 0~100% Blue 000-255 0~100% The EPROFILE FC is a full-color LED pro le. Amber 000-255 0~100% Lime 000-255 0~100% 000-010 No function FEATURES Strobe 011-255 Strobe slow to fast 000~010...
DMX CHARTS MAINTENANCE MAINTENANCE AND CLEANING THE UNIT • Make sure the area below the installation place is free from unwanted persons during setup. Function Value Percent/Setting Dimmer 000-255 0~100% • All screws used for installing the device and any of its parts should be tightly fastened and should not Dimmer Fine 000-255 0~100%...
Page 6
OVERVIEW DMX CHARTS Gobo Barrel holder Focus rotation slot knob knob Function Value Percent/Setting Handle 000-255 0~100% Green 000-255 0~100% Blue 000-255 0~100% Amber 000-255 0~100% Lime 000-255 0~100% 000-010 Preset LED Frequency from display menu 011-050 600Hz 051-100 1200Hz LED Frequency 101-150 2000Hz...
Page 7
DIMENSIONS MENU FUNCTIONS (cont’d) Main Menu Menu level 2 Menu level 3 Menu level 4 Defaults DMX Address <001> DMX Channel 12CH 12Ch 14Ch Master Master/Slave Slave Slave <125-255> White Balance Manual Green <125-255> RGB=255 Blue <125-255> 600 Hz 1200 Hz LED Frequency 2000 Hz 1200Hz...
- Auto Show: Select one of ve preprogrammed shows Auto 4 <1-100> - Master/Slave: Set the EPROFILE FC to function either as a master or slave when linking multiple units Auto 5 <1-100> - Dimmer Mode: Select the preferred dimming curve (1 = fast, 2 = medium, 3 = slow)
Need help?
Do you have a question about the EPROFILE FC and is the answer not in the manual?
Questions and answers