Power control panel. Suspend mode works and looks just like you have turned the unit off. Press the [ On/Off ] key to suspend (put to sleep) the CHD Five. Press the [ On/Off ] key again for the PDA to resume its previous state.
RAM memory will be lost. If your backup battery is less than fully charged, there is proportionally smaller window of time available. Use only the correct battery packs, charger, and dock supplied by a CHD or CHD dealer. The use of other battery supplies can damage the PDA and void your warranty.
1.5. B ATTERY ISPOSAL Replace the battery pack only with one supplied by a CHD reseller. When the battery is worn out, insulate the battery contacts with adhesive tape or a similar material prior to disposal. Please recycle Lithium-Ion Batteries.
CHD FiVE Using CHD FiVE 2.1. D ESKTOP Workflow is like all other Microsoft operational systems. To run program double tap on a shortcut icon on desktop or run program from Start menu. Below is standard desktop layout. Computer Hardware Design...
CHD FiVE 2.2. I NBOX The PDA comes with Inbox for Windows CE .NET installed from the factory. Inbox is a familiar Microsoft email interface. To set up Inbox: Open Inbox by selecting Start > Programs > Inbox. Select Services > Options from the command bar. Drag the dialog to show the right edge to configure email.
CHD FiVE 2.3. I NTERNET XPLORER The PDA comes with Internet Explorer for Windows CE .NET installed Open Internet Explorer by selecting Start > Programs > Internet Explorer. To set a default home page, navigate to the desired default web page.
CHD FiVE 2.4. Q UICK PPLICATION Go to Start > Programs > Scanner > Quick ScanSet to open the bar code scanning application. This application works in the background and has a System Tray Icon you can use to access it's features and functions.
CHD FiVE 2.5. W The PDA comes with WordPad for Windows CE .NET installed from the factory. To start Wordpad, select Start > Programs > Microsoft WordPad. The following text and document file types are compatible with WordPad: • Text (* . txt) •...
CHD FiVE 2.6. I NSTALLING ROGRAMS Programs pre-installed on the device are stored in ROM (read only memory). You cannot remove, or modify this software. You may add programs and data files to RAM (random access memory) or into memory card. Please follow the directions provided with the software to install it.
CHD FiVE Using File Explorer to Add to the Start Menu 1. Select Start > Programs > File Explorer, and select the folder where the pro gram is stored. 2. Select Cut from the Edit > Cut from the command bar.
CHD FiVE 2.7. R EMOVING ROGRAMS Only user installed programs can be removed. To remove a program select Start > Settings > Control Panel > Remove Programs. Select the program you wish to remove from the list and press remove.
CHD FiVE Configuring a PDA 3.1. C ONTROL PANEL To change the settings on your new PDA, select Start > Settings > Control Panel to view the Control Panels and settings you can modify. Other than the Quick ScanSet applet, the list of settings is standard Windows CE .NET settings.
CHD FiVE 3.2. S TYLUS You might need to align the touch screen (i.e. when you notice that when you attempt to select one item with the stylus, another item is erroneously selected). To align the touch screen, press <FUNC> + <Space> to open the align Screen dialog as shown to the right.
CHD FiVE 3.3. B ACKLIGHT 1. Select Start > Settings > Control Panel > Backlight Battery power Modify display brightness when on battery. Set backlight timeout time Enable to turn on backlight when a button is pressed or the screen is...
CHD FiVE Modify display brightness when on battery. Set backlight timeout time Enable to turn on backlight when a button is pressed or the screen is tapped Keyboard backlight Set keyboards backlight timeout. Computer Hardware Design...
CHD FiVE 3.4. B LUETOOTH Select Start > Settings > Control Panel > Bluetooth devices Click Scan Device button to scan Bluetooth devices in range. Computer Hardware Design...
CHD FiVE 3.5. D ATE AND In the Date/Time options, you can change the year, month, date, time, time zone, or select automatic adjust for Daylight Savings Time. To set or change the date and time: 2. Select Start > Settings > Control Panel > Date/Time 3.
CHD FiVE 3.6. D IALING Edit dialling properties to connect device to network Select Start > Settings > Control Panel > Display Computer Hardware Design...
To modify the display and/or backlight of the PDA refer to the following: Background To change the Background image: The current file is located in the Windows directory with the CHD logo file named logo.bmp. Place a new image in the Windows directory. This file must be exactly 240 by 320 pixels.
CHD FiVE Appearance To change Windows appearance default settings: 1. Select Start > Settings > Control Panel > Display > Appearance tab. 2. Select form Items dropdown menu desired item 3. Press on color box to change items color 4. To save your created appearance scheme tap on < Save .. > button.
CHD FiVE 3.8. I NPUT ANEL To change the Soft Input Panel settings: 1. Select Start > Settings > Control Panel > Input Panel. 2. Change the desired settings. 3. To change the Soft Keyboard Options, tap the Options button.
CHD FiVE 3.9. I NTERNET ETTINGS Computer Hardware Design...
Page 27
CHD FiVE To change the Internet default settings: 1. Select Start > Settings > Control Panel > Internet Settings. 2. On the General tab - type in the URL of the desired start page and the desired search engine. You can also change the Cache Size, clear the Cache, and Clear the History.
CHD FiVE 3.10. K EYBOARD Select Start > Settings > Control Panel > Keyboard Enable or disable character repeat Adjust repeat delay and rate settings. If needed test your settings. Computer Hardware Design...
CHD FiVE 3.11. N ETWORK AND DIALUP CONNECTIONS Select Start > Settings > Control Panel > Network and dialup connections Create new or edit current network connection settings. Computer Hardware Design...
CHD FiVE 3.12. O WNER To change the Owner default settings: 1. Select Start > Settings > Control Panel > Owner Properties. 2. Enter data using the input panel or the keypad on the PDA. 3. In the Notes tab set additional notes.
CHD FiVE 3.13. P ASSWORD To change the Password default settings: 1. Select Start > Settings > Control Panel > Password Properties. 2. Enter the desired password twice as indicated in the two fields. 3. Select to enable password protection at power-on.
CHD FiVE 3.14. PC C ONNECTION The PC Connection control panel determines how ActiveSync works with the PDA. To modify the default settings: 1. Select Start > Settings > Control Panel > PC Connection. 2. Select the first checkbox to enable direct connections to the desktop computer.
CHD FiVE 3.15. P OWER ONFIGURATION To adjust power management settings, 1. Select Start > Settings > Control Panel > Power. Use this control panel to check the charge on the battery or to change the Power settings. 2. The Battery tab provides change level indicators for Main battery, and Backup battery.
CHD FiVE 3.16. P ROGRAMM BUTTONS Select Start > Settings > Control Panel > Power Select programmable button Chose its type: • Default – button will be assigned • No function – button does not have any functions • Scan key – button is used as Scan key •...
CHD FiVE 3.17. R EGIONAL SETTINGS To change the Regional Settings defaults: 1. Select Start > Settings > Control Panel > Regional Settings. 2. Select the desired language/location. 3. Review the Appearance Samples in the bottom half of the screen.
CHD FiVE 3.18. S CANNER CONFIGURE To change the Scanner Settings and bar code types, complete as follows: Go to Start > Programs > Scanner > Quick ScanSet to open the bar code scanning application. The only indicator that the program is open is the bar code System Tray icon.
Page 37
CHD FiVE Section Option Description Basic Scanning Trigger timeout Set scanner (sec) timeout time Good read off Scanner will stop scanning after good read. Enable continuous Scanner will scan scan continuous until if checked good read. Rescan after (sec) Set rescan time if...
Page 38
CHD FiVE Details Enable this code Tap/enable this checkbox to enable the selected bar code type. Features Select the desired features you wish to enable for that specific bar code type. Length Set the minimum and maximum lengths from the pull-down lists.
CHD FiVE setting current settings, if you wish to return to the previous settings, tap the Revert to Last Setting button. 3.19. S TORAGE MANAGER To change the Storage Properties control panel default settings: Insert secure digital (SD) storage card into the PDA Select Start >...
CHD FiVE 3.20. S YSTEM ROPERTIES Refer to the System control panel for information related to the system. General Select Start > Settings > Control Panel > System Properties > General tab to determine the following information about your PDA: •...
CHD FiVE Memory Move the slider to adjust memory allocation. Move slider to the left for more memory to run programs. Move it to the right for more storage space. Device name Your device uses this information to identify itself to other computers.
CHD FiVE 3.22. V & OLUME SOUNDS Select Start > Settings > Control Panel > Volume & sound Adjust sound volume and enable sounds. Change sounds for different items. Copy custom wav file into /windows directory and select it from list.
Page 44
Regulatory Statements to be included in the Users Guide for Sputnik USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the FiVE and is the answer not in the manual?
Questions and answers