Summary of Contents for PC LINE PCL-FL1
- Page 1 PCL-FL1 3D Laser Mouse OWNER'S GUIDE DO NOT direct the laser beam at anyone’s eye. CAUTION: To use this mouse properly, please read the user's guide before installation...
- Page 2 Welcome Your mouse uses a new generation technology – laser module that replaces the traditional LED mouse and provides amazing tracking ability. The laser module accurately scans the surface with 30 times the sensitivity of an LED optical mouse. You can work with your mouse on most surfaces perfectly.
-
Page 3: Using Your Mouse
SETUP the Mouse The Mouse is connected to your computer via a cable. Plug into your computer via a USB port. USB Port For USB port installation Windows 98 (or higher) is required for USB port installation. Connect the receiver cable to the USB port on the computer. -
Page 4: Troubleshooting
Troubleshooting If your mouse does not work after installation, try one or more of the following: Make sure the cable is plugged into the right mouse port. Unplug the Mouse and then plug in the mouse again. Make sure that Mouse had been detected by the Operating Systems properly. Make sure your mouse port has the proper configuration. - Page 5 Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. www.partmaster.co.uk Visit or ca 0870 6001 338 (UK customers only) Calls charged at National Rate.