Summary of Contents for Christie EDR70X-LPR
- Page 1 EDR70X-LPR POWER PACK (ELECTRIC) USER GUIDE Ref: WCOI.024 Date: June 2015 Issue: 4...
-
Page 2: Table Of Contents
CONTENTS Page Description Introduction Specification Accessories Available Power Pack Features Operating Instructions Safety Power Pack Parts List Hydraulic Hose Parts List Fault Finding E.C. Declaration of Conformity... -
Page 3: Introduction
INTRODUCTION The EDR70X-LPR power pack is a portable, electrically actuated, double acting, “Xtra” pump with a low pressure return. The Christie range of power packs are the toughest on the market, combining effortless power with supreme performance. The power pack is supplied complete with one control pendant / cable assembly and two hydraulic hose assemblies. -
Page 4: Power Pack Features
POWER PACK FEATURES Motor Control Pendant Control Panel Hydraulic Pressure Gauge Female Coupling Mains Cable Oil Level Gauge Pressure Adjuster (Relief Valve) Male Coupling Oil Tank (Reservoir) -
Page 5: Operating Instructions
DO NOT OPERATE THIS TOOLING BEFORE THE OPERATING AND SAFETY INSTRUCTIONS ARE READ AND UNDERSTOOD. IF BREAKDOWN, MALFUNCTION OR DAMAGE OCCURS DO NOT ATTEMP TO REPAIR, CONTACT W. CHRISTIE (INDUSTRIAL) LTD IMMEDIATELY. Before using the power pack electric unit ensure:- The operating and safety instructions are read and understood. -
Page 6: Safety
The pump unit contains aluminium and magnesium; this makes it unsuitable for use in certain industries i.e. mining and petrochemical. For guidance contact W. Christie (Industrial) Ltd. A power pack should never be used without a motor silencer fitted, noise may cause damage to hearing. -
Page 7: Power Pack Parts List
POWER PACK PARTS LIST... -
Page 8: Hydraulic Hose Parts List
HYDRAULIC HOSE PARTS LIST... -
Page 9: Fault Finding
Pump not switched on Switch on Control panel tripped Reset Trips Motor / electrical fault Contact W.Christie (Industrial) Ltd Low oil level Top up Motor runs but no pressure visible on gauge. -
Page 10: E.c. Declaration Of Conformity
European Machinery Directive 2006/42/EC published on the 9 June 2006 W Christie (Industrial) Ltd, Meadowbank Road, Rotherham S61 2NF, United Kingdom. This machinery has been designed and manufactured in accordance with the following transposed harmonised European Standard:- Safety of Machinery –...
Need help?
Do you have a question about the EDR70X-LPR and is the answer not in the manual?
Questions and answers