Installing the Cigarette Lighter Adapter
Connect the cigarette lighter cable adapter to the connector with
the white tag in the left storage pocket.
Adapter
Connector
Connector
(White Tag)
Charging the Battery
Note:
When a battery is installed, the RP 1000 sounds a
beep every 30 seconds when the battery is low.
To charge the battery, plug the AC power cord into a wall outlet or
the cigarette lighter adapter into the vehicle's cigarette lighter. The
RP 1000 battery completely charges in approximately 3 to 4 hours
and 4 to 5 hours with the terminal installed in the printer.
R P
1 0 0 0
8