Set the USB mode
You can set the USB mode to allow mass storage or data streaming when you
connect the U5850 Series to the PC using the USB cable. The default selection is
Ask each time. If Ask each time is selected, you will be prompted to select
between mass storage or data streaming upon the start-up of the U5850 Series.
This prompt occurs when you connect the U5850 Series to the PC using the USB
cable.
Do not press any keys on the U5850 Series TrueIR Thermal Imager when you are
NOTE
connecting its USB cable to the PC and launching the Keysight TrueIR Analysis
and Reporting Tool software.
Follow steps 1 to 2 from
Keysight U5850 Series User's Guide
Data Management and System-Related Functions
"Display the tutorial"
on page 107.
3
1
2
115