Page 3
Industrial POE Media Converter / Industrial POE Switch <Industrial Optical POE Media Converter> Model No. Description NEXT-300FSCM-POE 10/100M MMF,1310nm,SC,2km, with POE NEXT-300FSCS-POE 10/100M SMF,1310nm,SC,20km, with POE NEXT-300FSCSWA-POE 10/100M Bi-di TX1310/RX1550nm,SC,20km, with POE NEXT-300FSCSWB-POE 10/100M Bi-di TX1550/RX1310nm,SC,20km, with POE NEXT-3000SFP-POE 10/100/1000M SFP with 1TP POE Page 3 of 3 www.ez-net.co.kr...
Page 4
“On”: SFP1 Fiber link is in correct connection. FL/A1 “Blink”: Signal packet goes through SFP1 Fx end SFP1 SFP mould port 1 SFP2 SFP mould port 2 1×4 RJ45 Copper cable connector DIN kit DIN-rail mounting kit Ear kit Wall mounting kit Page 4 of 4 www.ez-net.co.kr...
Industrial POE Media Converter / Industrial POE Switch 4. Installation 4.1 DIN-rail installation The DIN installation is based on the Pic 1 and Pic 2. Unload is based on the Pic 3, then Pic2 and Pic 1. Page 5 of 5 www.ez-net.co.kr...
56VDC,V1+,and V2+ are positive, V1- and V2- are negative, and the equipment supports anti reverse Pic 7 function; Two sets of power can be simultaneously accessed. So if One of the power failure, the switch is still able to work; Page 6 of 6 www.ez-net.co.kr...
We will not cover the damage caused by your using unqualified power supply. (4) Do please follow this manual when using the power supply. Page 9 of 9 www.ez-net.co.kr...
Page 10
Dimension (Industrial POE Switch) (Industrial POE Media Converter) Page 10 of 10 www.ez-net.co.kr...
Need help?
Do you have a question about the NEXT-300FSCM-POE and is the answer not in the manual?
Questions and answers