Preventive Maintenance; Accessory List; Troubleshooting - Telecast Adder 882 Instruction Manual

Adder 882

Preventive Maintenance

Carry out the following procedures every two years:
¥ Replace the internal Ni-Cad battery pack.
¥ Verify the adequacy of optical power at the far end of each optical Þber. Use an optical power
meter such as the one in the Accessory List.

Accessory List

The following accessories are available from Telecast:
¥ Optical power meter kit
¥ Cable repair kit
¥ Loop-back cable to localize signals during installation test
¥ Replacement Ni-Cad battery pack
¥ Quick-crimp kit to attach ST connectors to Þber optic cable
¥ Prefabricated cables built to custom lengths

Troubleshooting

Refer to the troubleshooting chart on the following page. If you are unable to resolve the
problems with your Adder 882 System, call Telecast Fiber Systems, Inc. at 508-754-4858 and ask
for our service department.
To return a unit for repair, obtain a return material authorization (RMA) number from Telecast
service.
16 1 April 1999