Pvr File System (Dtv Mode) - JVC LT-48C570 Instruction Manual

3. Press the
buttons to select the following options, and then press
buttons or 0-9 buttons to adjust each option's setting or the OK
the
button to select the options.
IP Config
Press the
Manual mode.
If Manual Mode is selected, use the
to select IP, Netmask, Gateway and DNS.
Then press the OK button, and use 0-9 buttons to
enter the values.
It also display MAC Address in IP Config menu.
Finally, press the OK button to connect the
setting.
Network Info
Display the network information.
Network Test
Press to test the network.
4. Press the MENU button to return to the main menu or press the EXIT button to exit the menu.

PVR File System (DTV Mode)

Allows you to select your preferences in the PVR File System.
1. Press the MENU button to display the main menu. Press the
buttons to select the System and then press the OK button.
2. Press the buttons to select PVR File System and then press the OK
button.
3. Press the
buttons to select the following PVR File System options
and then press the OK button. Press the MENU button to return to the
previous menu.
Select Disk Press the
Timeshift Size Press the
Format Start Press the OK button, a pop-up window will display. Press the
then press the OK button to start formatting.
Speed Check
This shows the transfer rate of your USB storage device.
4. Press the MENU button to return to the main menu or press the EXIT
button to exit the menu.
buttons to select Auto mode or
buttons
buttons to select the disk where you want to store your recorded content.
buttons to adjust your preferred file size.
Customising TV Settings
Network
IP Config
Network Info
Network Test
Move Adjust
OK Select EXIT Exit
PICTURE SOUND CHANNEL
TIME LOCK SETTINGS
System
NETWORK
PVR File System
Software Update (USB)
Reset TV
Move Adjust
OK Select EXIT Exit
button to select "Yes" and
5
SOURCES
SYSTEM
47