Advertisement
ROFU 8035 SHEARLOCK
INSTALLATION MANUAL
The 8035 series is available in two models, the 8035 is unmonitored or the 8035-002
has hall-effect monitoring. The units may be installed in wood,
with or without available housings. This manual gives a guide to all of the above applications
1.
Full Dimensional Drawing
2.
Technical Specification
3.
Flush Installation
4.
Semi-Flush Installation
5.
Surface Installation
6.
Full Glass Door Installation
Copyright © ROFU Security International Corp. All rights reserved.
ROFU-8035 Published on: 2015.08.24
and other useful installation information.
ROFU Security International Corp.
10029 South Tacoma Way, E-11
Tacoma, WA 98499
1-800-255-7638
www.rofu.com
R F U
O
, metal or glass doors
Advertisement
Table of Contents
Summary of Contents for ROFU 8035
- Page 1 ROFU 8035 SHEARLOCK INSTALLATION MANUAL R F U The 8035 series is available in two models, the 8035 is unmonitored or the 8035-002 has hall-effect monitoring. The units may be installed in wood, , metal or glass doors with or without available housings. This manual gives a guide to all of the above applications and other useful installation information.
- Page 2 ROFU 8035 Magnetic Lock Assembly...
- Page 4 Full Dimension Magnet Assembly 7.09” (180mm) 6.46” (164mm) Armature Assembly Side View Magnet Assembly 6.46” (164mm) 1.06” 0.91” (27mm) (23mm) 7.09” (180mm) A rmature Assembly 6.46” (164mm) 1.06” 0.91” (27mm) (23mm) 7.09” (180mm)
-
Page 5: Technical Specification
NOTE: THE LOCK SHOULD BE POWERED BY A LISTED UL603 / UL1023 POWER SUPPLY UNIT FOR USE WITH BURGLARY ALARM SYSTEMS. Maximum Model Wire Gauge Number of Turns Electric Resistant at 20℃ 8035 0.01” (0.23 mm ) Ω Double Turns 25.3... -
Page 6: Flush Installation
FLUSH INSTALLATION The unit is designed to be flush mounted. The magnet should be fitted into the header (jamb) and the armature plate into the top of the door. It is vital that a minimum gap of 1/16”(2mm) exists between the magnet and the armature, to allow correct operation. - Page 7 SEMI-FLUSH INSTALLATION The unit may also be fitted semi-flush with the use of the 21036 housing. The magnet should be fitted to the door transom and the housing holding the armature on to the door. It is vital that a minimum gap of 1/16” (2mm) exists between the magnet and the armature, to allow correct operation.
-
Page 8: Surface Installation
SURFACE INSTALLATION The unit may also be fitted surface mounted using 2pcs of the 21036 or 21054 (Tamperproof) housing. The housing holding the magnet should be fitted above the door and the housing holding the armature on to the door. It is vital that a minimum gap of 1/16”... - Page 9 FULL GLASS DOOR INSTALLATION (NOT VERIFIED BY UL) The unit may also be fitted to a full glass door and glass frame application, using 2pcs of the 21036 housing and 2pcs of the 21037 U-brackets. The housing holding the magnet should be clapped above the door and the housing holding the armature clapped on to the door.
-
Page 10: Installation
NOTICE: For Ver tical Installation Change the spring which is provided in the screwpack. ROFU Security International Corp. 10029 South Tacoma Way, E-11 Lakewood, WA 98499 USA www.rofu.com / 1-800-255-7638...
Need help?
Do you have a question about the 8035 and is the answer not in the manual?
Questions and answers