BQT Solutions COBALT-mini YD39M Installation And Operating Instructions Manual

Electronic side load lock

Advertisement

Quick Links

INSTALLATION AND OPERATING INSTRUCTIONS
COBALT-mini
YD30M

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COBALT-mini YD39M and is the answer not in the manual?

Questions and answers

Summary of Contents for BQT Solutions COBALT-mini YD39M

  • Page 1 INSTALLATION AND OPERATING INSTRUCTIONS COBALT-mini YD30M...
  • Page 2: Table Of Contents

    Pg. 9 o 7.1. Fail Safe Operation o 7.2. Fail Secure Operation  8. SPECIFICATIONS Pg. 10  9. MAINTENANCE Pg. 10  10. WARRANTY Pg. 10  11. UPGRADE Pg. 10 © BQT Solutions (SEA) Pte Limited Page 1...
  • Page 3: Description

    The 7 way wire loom supplied is used to ease installation as the wiring can be done without the lock being installed until the very end. Wire Loom Mounting Screws Fitting Tabs Strike Plate Lock © BQT Solutions (SEA) Pte Limited Page 2...
  • Page 4: Dimensions

    3. DIMENSIONS 3.1 Lock 3.2 Strike Plate 3.3 Fitting Tab 3.4 Housing Available separately 3.5 Dress Plate Available separately © BQT Solutions (SEA) Pte Limited Page 3...
  • Page 5: Pre - Installation Assesment

    12VDC or 24VDC: MAXIMUM DISTANCE (m) AREA (mm2) 12VDC 24VDC 0.20 0.33 0.52 0.82 1.31 2.08 © BQT Solutions (SEA) Pte Limited Page 4...
  • Page 6: Installation

    M5 machine screws. The strike plate is then placed into the cut out and the remaining M5 screws are used to secure it. Lock secured directly into the door frame. © BQT Solutions (SEA) Pte Limited Page 5...
  • Page 7 The Red, Black and Blue wires are essential connections whilst the Violet and White are optional. Detailed wiring instructions can be found in Section 6. © BQT Solutions (SEA) Pte Limited Page 6...
  • Page 8 If its rubs or touches the side of the strike plate hole, either the lock or strike plate needs to be re-positioned. © BQT Solutions (SEA) Pte Limited Page 7...
  • Page 9: Wiring

    The lock signal in Fail Secure configuration is active low. . WHITE Door Position Switch WHITE VIOLET Bolt Position Switch VIOLET Wire loom from lock NO - Locked BLUE NC - Unlocked BLACK DC Power Supply © BQT Solutions (SEA) Pte Limited Page 8...
  • Page 10: Operation

    BLUE wire and the door is closed. In the event of a power failure, voltage is removed from the BLUE wire and the COBALT-mini locks if the door is closed. © BQT Solutions (SEA) Pte Limited Page 9...
  • Page 11: Specifications

    Mistreatment or ill-use of the lock may void the warranty. COBALT-mini is a trademark of BQT Solutions (SEA) Pte Limited. BQT Solutions (SEA) Pte Limited will not be liable for any direct, indirect, incidental or consequential loss or damage in any way related to this product.
  • Page 12 NOTES © BQT Solutions (SEA) Pte Limited Page 11 Version 3.0...

Table of Contents