Advertisement
Temperature
Monitoring
Humidity
Power supply
Quick Start Manual MiniCom
An innovative monitoring system for your environment
This kit contains:
MiniCom Guardian
Combined sensor for Temperature and Humidity
1 meter blue CAT5 cable
Power supply 230V AC/4,5V DC
Battery Unit
DIN mounting Rail
Quick Start Manual (this)
SIM
You need to:
Order a SIM Card from your local Network supplier!
Please visit
.4tech.no
WWW
for further information.
®
®
Guardian
4tech AS, Solbraaveien 49, N-1383 Asker, Norway
Phone: +47 32 79 22 30 - Fax: +47 31 40 03 20
mail: sales@4tech.no - www.4tech.no
Advertisement
Table of Contents
Summary of Contents for 4tech MiniCom Guardian
- Page 1 Quick Start Manual (this) You need to: Order a SIM Card from your local Network supplier! Please visit 4tech AS, Solbraaveien 49, N-1383 Asker, Norway .4tech.no Phone: +47 32 79 22 30 - Fax: +47 31 40 03 20 for further information.
- Page 2 Temperature ® Monitoring Humidity Power supply Installation Slide until you hear Install the Guardian control unit in a dry indoor the “click” environment. 1. Remove the front cover, and insert the SIM card into your Guardian control unit (located in the battery compartment).
- Page 3 Monitoring Humidity Power supply Telephone no: Serial no: The MiniCom Guardian is configured using simple SMS commands. Several commands may be sent as one single SMS separated by spaces. Example (max/min values equals factory presets): ID=”Server room” MINTEMP=18 MAXTEMP=26 MINHUM=10 MAXHUM=60 PHN=1,[your phone number] This command sets the “name”...
- Page 4 Humidity Power supply The MiniCom Guardian monitoring power supply: It is important to connect the Gardian to the power supply you want to monitor. If you experience power outage the Guardian will give you an alarm: Main power missing, temp, hum, and active alarms.
Need help?
Do you have a question about the MiniCom Guardian and is the answer not in the manual?
Questions and answers