Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Allied Time USA AT-2700
-
Page 1: User Manual
Allied Time USA Model AT-2700 Time Recorder User Manual Version 0.2 Page | 1... - Page 2 Time Card Assignment The AT-2700 uses cards specifically designed for it to accurately record employees’ IN and OUT times. The punched holes at the bottom of the card identify the different card numbers to the clock, as each employee will need a unique numbered time card per each pay period. The card numbers # 1-50 are located at the top right hand side of the card.
-
Page 3: Table Of Contents
Table of Contents SETUP INSTRUCTIONS ........................... 4 Setup Year ............................4 Setup Month ............................. 4 Setup Date ............................4 Setup Time -Hour ..........................4 Setup Time- Minutes ......................... 4 Display Hour Format ......................... 4 Printed Hour Format ......................... 4 Printed Minutes Format ........................4 Day Change Time .......................... -
Page 4: Setup Instructions
SETUP INSTRUCTIONS To enter setup mode, please move SETUP Switch to the left. To change or set a desired feature, press Enter button first, then use + or – buttons to make your selection, then press Enter again to confirm your change. -
Page 5: Day Change Time
Day Change Time (DEFAULT=00:00): use to select time of the day when the clock should switch to the next calendar day. DEFAULT is set to midnight. To make changes, press Enter, select desired Hour using buttons, then press Enter again to confirm. Daylight Savings Time 1.10 (DAYL’T SAV=ON): use to turn ON or OFF Daylight Savings Time. -
Page 6: Pay=Monthly
PAY=MONTHLY : select this option for monthly pay cycle. Select the Ending Date for the Monthly pay cycle (EDATE=LAST): press Enter and use buttons to select one of the following pay cycle options: 1) LAST: your pay cycle ends on the last day of each month. 2) LAST-1: your pay cycle ends 1-Day prior to the end of each month. -
Page 7: Customer Support
CUSTOMER SUPPORT Should you need any assistance with your AT-2700 time clock, please contact Allied Time Customer Support by phone 888-860-2535 or by email sales@alliedtime.com. TROUBLESHOOTING/ERROR CODES Error Error Resolution Code Description This time card was already punched IN or OUT less than a minute ago. -
Page 8: Replacing Ribbon Cartridge
REPLACING RIBBON CARTRIDGE Unlock and Remove the Cover Locate the print ribbon mounted on the ribbon cartridge holder Secure ribbon in place with one hand by putting pressure on ribbon holders; grab ribbon handle with the other hand (as shown in figure below) and gently lift up the ribbon to remove from the holder.
Need help?
Do you have a question about the AT-2700 and is the answer not in the manual?
Questions and answers
Why doesn't my timer specify in and out it doesn't specify out
How to replace battery