Keysight 82351A Quick Start Manual page 5

Regulatory Markings
• Do not use the device if it appears damaged or defective.
WA R N I N G
• Observe all markings on the device before connecting any wiring to the device.
• Do not operate the device in the presence of flammable gases or fumes.
• Do not install substitute parts or perform any unauthorized modification to the
• Use the device with the cables provided.
C A U T I O N
• Repair or service that this not covered in this manual should only be performed by
82351A Quick Start Guide
The CE mark is a registered trademark of the European Community. This CE mark
shows that the product complies with all the relevant European Legal Directives.
ICES/NMB-001 indicates that this ISM device complies with Canadian ICES-001.
The C-tick mark is a registered trademark of the Spectrum Management Agency of
Australia. This signifies compliance with the Australia EMC Framework
regulations under the terms of the Radio Communication Act of 1992.
This instrument complies with the WEEE Directive (2002/96/EC) marking
requirement. This affixed product label indicates that you must not discard this
electrical/electronic product in domestic household waste.
device.
qualified personnels.
III