Page 2
This manual suits to the Z1000 series balance car. ◆ WARNING! Before you drive the Z1000 car to get on road, please learn how to drive ◆ it safety, to avoid collision, falling down or losing control of it, and other risks.
1.3 Preparatory work before driving ..........1 1.4 Relevant instructions for the document ........ 1 2. Production introduction ..............2 2.1 Z1000 vehicle model description ..........2 2.2 Z1000 components description ..........3 2.3 Z1000 working principle ............4 3. Control and information displaying devices ........5 3.1 Pedal sensors...
Page 4
7.3 Temperatures too high or too low ........17 7.4 Detailed battery s jiecifications ..........17 7.5 Precautions for battery transport ........17 8. Routine maintenance ................18 8.1 Cleaning ................18 8.2 Storage ..................18 9. Z1000 parameters ...............19 16. Packing list ................20 11.Troubleshooting ................21 Wish you happy in use ................21...
1.3 Preparatory work before driving Before using it, you shall check the Z1000 battery to make use it is properly charged, for details see section 5 of this manual. I f you did not use it according to the precautions specified in the manual, it is possible to bring injury to you.
2. Product introduction 2.1 Z1000 series vehicle model description Z1000 is a high-tech mini electric car with double wheel and self balance which uses the dynamic balance principle to control moving forward, backward, turning and stopping. Z1000 has obvious advantages like...
Z1000 built-in inertia dynamic stabilizing system can keep horizontal in ◆ forward and backward directions, but it can not ensure the stability in left and right direction. So, drivers of Z1000 must slow down for turning, to avoid body injuries due to too large centrifugal forces. - 4 -...
The display panel is located in middle of Z1000, used to display the operational data of Z1000. A is battery level display zone: if the green light is on, it means Z1000 ◆ battery level is good. If it turns to yellow one, it means the battery level availaIe is 40%.
Please do not modify any part of Z1000 at will, or else it will affect ◆ performance of Z1000 or even damage it, and c a u s e severe d a m a ge accordingly meanwhile. 4.2 Loading weight limit of driver Loading weight limit is due to the following two points: 1.
At the regulated speed, Z1000 can maintain a good balance for the driver. ◆ If the driving speed is over the specific speed, the Z1000 will tilt up to make it able to limit the speed within the safety speed.
"Users' manual" before driving it, which is extremely important for you. 5.1 Operational procedures of Z1000 Step 1: to start Z1000, you press down the power-on button (or the power ◆ on button on the remote). Step 2: to prepare for driving, you stamp on the pedal with one foot to turn ◆...
Page 13
Step 4: to operate Z1000 in the left and right direction. ◆ Step 5: to get down the car. Before getting down, you need to let the Z1000 ◆ stop moving. By keeping in a balance condition, you let one of your feet step down first, and another foot leave the pedal quickly.
5.2 Protection function of Z1000 During driving, if the system error or illegal operation happens, the Z1000 will remind the driver in different ways. For forbidding riding, the alarming light will be lit always, and the buzzer will give alarming at intervals, the system can not enter the self-balance mode.
Anytime you shall not let the Z1000 leave the ground surface. The Z1000 is designed as a recreational tool for flat pavement. If users drive it ◆ on uneven pavement, he or she shall slow it down.
This section focuses on some safety knowledge and warning declaration, letting you have some understanding of the safety precautions before you use Z1000. In order to ensure you can drive Z1000 safely, you must read the "Users' manual" fully and observe the relevant safety instructions. Please mind all the safety warnings and precautions for use as mentioned in the "Users' manual"...
Page 17
Please wear clothes suitable for sports when you use Z1000, which benefits ◆ for you to better handle emergency conditions. Z1000 can be used by only one person, it is not allowed to carry two persons ◆ or more. The total weight of the user and the object carried, shall not exceed the max.
Page 18
It is not allowed to drive Z1000 on wet and sliding road in rainy days, back- ◆ ward for long distance or at high speed, or to turn during fast backward driving, or at too high speeds. This personal transport tool is not designed to be a medical care equipment, ◆...
Please charge and store the battery as per the regulations, or the batter will ◆ be damaged and its life shortened. The charging time of Z1000 is about 2 to 3 hours, extra long charging will ◆ affect the battery life.
WARNING:Li-ion battery is considered as dangerous object, so its trans- port shall be permitted by the local laws. NOTE: If you need to use airplanes to transport Z1000 with Li-ion battery, or use any other transport means to transport the Li-ion battery of Z1000 solely, please contact us.
Z1000. Before doing the following operations, ensure the power and charging line of Z1000 are disconnected. If the power is on or the battery is in charging, no operation is allowed. 8.1 Precautions before cleaning To ensure the power and charging line of Z1000 are disconnected.
9.Parameter Detailed parameter Item Parameter Remark Net weight 10 Kg Min. load 20 Kg Max. load 100 Kg Max. hourly speed 10 Km/h Varies depending on Max. distance per 15-20 Km different landform, driving direction and loading charge weight. Varies depending on Max.
10.Packing list Detailed parameter Item Quantity Host machine 1 set Charger Remote (optional) The manual Warranty card Reminder of prohibitions for safe driving When opening the package, if you find any damage or anything missing, please contact us, we will change or amend it as soon as possible. - 20 -...
Have a pleasant use. If there is problem happening when you use Z1000, please refer to the "Users' manual" . If you can not solve it after referring to the manual, please contact us.
Page 26
Any Changes or modifications not expressly roved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Z1000 and is the answer not in the manual?
Questions and answers