Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for ATrack AX7
Summary of Contents for ATrack AX7
- Page 1 Wireless Relay User Manual for AX7 Revision: 01 Revision Date: 2014/03/13 ATrack Technology Inc. Tel: +886-2-27975852 3F., No. 88, Sec. 1, Neihu Rd., Neihu Dist., Fax: +886-2-27974030 Taipei City 11493, Taiwan (R.O.C.) http://www.atrack.com.tw...
-
Page 2: Table Of Contents
3.2. Wireless Relay Installation ......................6 3.3. Wireless Relay Testing ......................... 7 3.4. LED Indications ..........................7 Appendix ..........................8 4.1. Hardware Specification ........................ 8 4.2. FCC Regulations: ......................... 9 © ATrack Technology Inc. All Rights Reserved. Page 2 of 9... -
Page 3: Notification
ATrack Technology Inc. products shall be avoided. ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries. Any or all parts of this document shall not be exposed to non-authorized party without any form of approval from ATrack Technology Inc. -
Page 4: Introduction
GPS/GPRS device. The relay ON/OFF state can be controlled by remote application server or SMS via cellular phone. It can be also controlled by itself when the AX7 device is unplugged. It utilizes short range RF technology and bi-directional data transmission between AX7 device and Wireless Relay. It’s a benefit to hide the Wireless Relay in anywhere of the vehicle. -
Page 5: Installation
Confidential Document The Wireless relay shall be paired with one AX7 device before installing it to the vehicle. The Wireless Relay serial number shall be entered into the AX7 device. Please refer to command description below. Relay Serial number AT Command Syntax: AT$RFPD=<”Relay Serial Number”>... -
Page 6: Wireless Relay Installation
(6) Connect yellow(87) wire to the wire at the starter motor side. The starter kill Wireless Relay diagram is shown below: Wireless Relay 86 Black 85 White 30 Blue 87 Yellow Starter Motor Ignition Switch 12V Battery © ATrack Technology Inc. All Rights Reserved. Page 6 of 9... -
Page 7: Wireless Relay Testing
0- Relay always OFF 1- Relay always ON 2- Timeout Mode (Default Mode) When Wireless Relay get signal from AX7 device, the Relay will ON. When AX7 device is unplugged and Wireless Relay no RF signal for 90 seconds, the Relay will OFF. -
Page 8: Appendix
-112dBm Frequency Tolerance ±40ppm Supply Power DC8V~DC16V Standby Current 0.9mA @ DC12V Active Current 40mA @ DC12V Operating Temperature -40°C ~ +85°C Operating Humidity 5% R.H. to 85% R.H. © ATrack Technology Inc. All Rights Reserved. Page 8 of 9... -
Page 9: Fcc Regulations
FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. © ATrack Technology Inc. All Rights Reserved. Page 9 of 9...
Need help?
Do you have a question about the AX7 and is the answer not in the manual?
Questions and answers