Advertisement
4 //
5
HOW TO OPERATE YOUR ISTEAM
1. Unscrew the nozzle head, fill the tank with cold water up to the desired level, never exceed the maximum
level. When finishing, lock the head back on.
2. Turn ON/OFF switch to ON position. The switch light indicates the steamer is on. The steamer will emit
steam from a nozzle in 1 minute.
3. When the unit runs out of the water, it will reset itself automatically to ensure your safety while leaving
the indicator light ON. If you wish to continue your steaming session, turn ON/OFF switch to the OFF
position, refill the water tank by following step 1 again, then turn ON/OFF switch to ON position.
4. When finished, place the ON/OFF switch in the OFF position and remove the plug carefully from the
outlet.
NOTE: Never turn the unit upside down. Your steamer should never be tilted past a 45-degree angle,
especially when the unit is ON. For perfect use - please use a hanger to hang your clothes while
steaming.
CLEANING YOUR ISTEAM
1. Unscrew the head and allow your isteam to cool for at least 10 minutes.
2. Empty any water remain from the water tank and allow it to air dry before replacing the head and setting
the tank back in the unit.
USER MANUAL
Advertisement
