Table of Contents
Advertisement
13. EC Type Examination Certificate
Physikalisch-Technische Bundesanstalt
Braunschweig und Berlin
EC-Type-Examination Certificate
(1)
(2)
Equipment and Protective Systems Intended for Use in Potentially
Explosive Atmospheres – Directive 94/9/EC
(3)
EC-Type-Examination Certificate Number
(4)
Device:
(5)
Manufacturer:
(6)
Address:
(7)
The design of this device and any acceptable variation thereto are specified
in the schedule to this certificate and the documents therein referred to.
(8)
The Physikalisch-Technische Bundesanstalt, notified body No. 0102 in
accordance with Article 9 of the European Community Council Directive of
March 23, 1994 (94/9/EC), certifies that this device has been found to
comply with the Essential Health and Safety Requirements relating to the
design and construction of equipment and protective systems intended for
use in potentially explosive atmospheres, given in Annex II to the directive.
The examination and test results are recorded in the confidential report
PTB Ex 02-22330.
(9)
Compliance with the Essential Health and Safety Requirements has been
assured by compliance with
EN 50014:1997 + A1 + A2
(10)
If there is an "X" after the certificate number, special conditions for the safe
use of the device are provided in the schedule to this certificate.
(11)
This EC-Type-Examination Certificate relates only to the design and
examination of the specified device in accordance with Directive 94/9/EC.
Further requirements of this directive apply to the manufacture and supply
of the device. These requirements are not covered by this certificate.
(12)
The labeling of this device must include the following information:
PTB 02 ATEX 2197 X
Explosion-proof Wall Clock, type Ex-time **
ecom instruments GmbH
Industriestrasse 2, 97959 Assamstadt, Germany
EN 50020: 1994
II 2 G EEx ia IIC T4
19
Advertisement
Table of Contents
