Contents Specifications Machine Parts Diagram Inner Packaging Details Safety Warnings Installation Replacement of the Battery Replacement of the Filter Cartridge Troubleshooting Others Warranty Information...
Inner Packing Details A. Machine body (1 PC) B. Connector head C. Parts and accessories Connector adapter 4pcs, multi-function joint 1 pc, adapter key 1 pc Others...
Safety Warnings The feed water of the machine must be higher or equal quality of municipal tap water. Please let the output water flow for about 15 seconds before using the purified water. Please let the output water flow for at least 1 minute if you didn’t use the machine for more than 2 days.
Installation Install Type A Connection Adapter (Suit for Screw Tap as Diameter 21.5mm or 23.5mm) 1. Dismount the nut from 2. Choose the suitable 3. Put the nut mounting in upward, the faucet adapter install the outer thread adapter with faucet Others 4.
Page 7
Installation Install Type B Connection Adaptor (Suit for Screw Tap as Diameter 20.5mm or 22.5mm) 1. Dismount the nut from 2. Take off the faucet diverter and 3. Put the nut-mounting in upward, the faucet choose the suitable adaptor install the inner thread adapter with faucet 4.
Replacement of the Battery A. Pull out the back cover of the battery box B. Open the cover of the battery box C. Remove batteries from the battery jar D. Place the new batteries into the battery jar E. Put the battery pack back into the machine housing F.
Replacement of the Filter Cartridges How to replace the filter cartridges? Before beginning point water output pipe to halfway down A. Align the tabs on the water output with the tabs on the housing. B. Put tab into unlock position C.
Troubleshooting Problems Reasons Solutions The head of the machine 1. Did not install the faucet 1. Install again (Leaking) in right way 2. Repair the faucet 2. The head of the faucet is Change the seal ring if broken or damaged. The the seal ring is broken seal ring is broken The head of the Connection...
Warranty Information This product features a 5-year warranty. If any manufacturing defects or failures occur during the warranty period, the unit will be repaired or replaced at no charge. If any failures occur, please call the customer service. In case of a failure resulting from the customer’s negligence or intentional damage of the product, the customer shall be responsible for repair or replacement costs.
Need help?
Do you have a question about the Hydro6000x and is the answer not in the manual?
Questions and answers