1. Camera connections Camera has three cables outside: 1) RS-485 communication: violet (red): RS485 + ● gray (black): RS485 - ● 2) Video signal BNC socket: video composite signal ● 3) Power supply 2.1/5.5mm socket: DC12V / 800mA ● 2. RS-485 port configuration The PTZ camera functions are controlled by RS-485 port.
Page 3
Example: 2+4+16 = 22. Address is 22. Transmision baudrate settings: 1200 b/s DIP7 = ON, DIP8 = OFF ● 2400 b/s DIP7 = OFF, DIP8 = OFF ● 4800 b/s DIP7 = ON, DIP8 = ON ● 9600 b/s DIP7 = OFF, DIP8 = ON ●...
Page 4
3. PTZ functions Camera functions can be called by CLEAR / SET / GOTO preset commands. Available functions are listed in the below table: 3.1 SET (set preset) Preset No.: Function 1 ... 32 Set preset point Set left limited point Set right limited point Set home point Set home point delay time to: 64 s...
Page 5
3.3 GOTO (go to preset) Preset No.: Function 1 ... 32 Goto preset point Goto pan zero point Goto home point Goto left limited point Goto right limited point Start auto scan...
Page 6
4. Camera menu functions To enter to the camera menu press the NEAR key on the keyboard. 4.1 Main Menu 1. LENS << Lens settings 2. SHUTTER/AGC << Shutter settings 3. WHITE BAL << White Balance 4. BACKLIGHT << BackLight Compensation 5.
Need help?
Do you have a question about the PTZ-715WP and is the answer not in the manual?
Questions and answers