Getting Started; Battery Installation; Battery Notice - VTech 80-179003 User Manual

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a screwdriver to loosen
the screw.
3. Install 2 new AA (LR6/AM-3) batteries
into the main unit following the diagram
inside the battery box. (The use of new,
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
the screw to secure.
4