This manual is protected by copyright. All rights reserved. The copying, reproduction, translation or recording on electronic media, in whole or in part, without written permission is prohibited by the Scubatech company. Bouyancy compensator User Instruction Manual Range of models:...
Compliance, understanding and reference to it is a condition for safe and long-term use of the products presented in this manual.. It is recommended to keep this manual for the lifetime of the product. Scubatech buoyancy compensators can only be used in a way presented in this manual.
Page 4
WARNING The content of this manual is based on the knowledge available at the time of going to print. Scubatech reserves the right to make changes at any time. WARNING Before every dive, make careful inspection the buoyancy compensator to make sure that there is no visible damage and leaks, and all components are working properly.
The buoyancy compensator is not a safety jacket or another means of rescue. WARNING ScubaTech shall not be liable for buoyancy compensator malfunctions if they have been subjected to misuse or using unauthorized spare parts or service made by an unauthorized person.
Rebreather markings. Scubatech buoyancy compensators are designed and manufactured in such a way that they can be used with any harness, having mounting hole spacing of 11 inches. Scubatech recommends using one of several harnesses within its range. Further information about the harness can be obtained from authorized Scubatech representatives.
Page 7
Donut 17 Special Edition Donut 22 Donut 22 Special Edition Donut 22 Special Edition Rebreather...
Page 8
Donut 30 Peanut 21 Figure 1. Tecline Donut buoyancy compensator series models used The basic components of this compensator: • buoyancy bag, • inflator, • medium pressure hose, • pressure relief valve. A very important element is the buoyancy compensator inflator which consists of an inflator button, which allows the buoyancy compensator to be filled with air and the deflator button which allows the buoyancy compensator to be emptied of air...
Figure 2. Basic components of the buoyancy compensator 5. Before using IMPORTANT Scubatech recommends the commissioning of the buoyancy compensator and pressure reducer to an authorized dealer for the proper connection of medium pressure power to the buoyancy compensator. The authorized dealer can also...
Page 10
WARNING It is forbidden to attach the medium pressure power supply buoyancy compensator hose to high-pressure output of the pressure regulator and the use of any reductions on medium pressure hoses. Prior to each dive, it is necessary to carry out inspection procedures to ensure all components of the buoyancy compensator are functioning correctly.
Warning! Never use a buoyancy compensator, if: • after 10 minutes from filling, there has been loss of air from the interior, • you release the valve deflator, the airflow to the interior still occurs. 6. Handling during a dive Entering the water In order to provide buoyancy on the surface, fill the compensator with air before entering the water Upon activation of the pressure-relief valve, it is necessary to stop...
In order to ensure the diver's buoyancy after emerging to the surface, fill the compensator using the deflator button. Upon activation of the extraction release valve, it is necessary to stop filling the compensator. 7. Use in cold water WARNING Diving in cold water requires completion of specialist training conducted by a qualified instructor.
Page 13
interior of the compensator, • rinse the inside of the buoyancy compensator with clean, fresh water. To do this, press the deflator button and fill the buoyancy compensator with water to about 20% volume. Rotate the compensator several times and then pour out the interior of the water according to the procedure described above.
Scubatech guarantees the original purchaser that the product will be free from defects in materials and workmanship, provided that the recommendations for use, maintenance and service are complied with, within the following limits.
Techline Donut 22 Special Edition Rebreather Tecline Peanut 21 ScubaTech Sp. z o.o. grants a 5-year warranty to the first owner for the proper functioning of the buoyancy compensator The following conditions must be fulfilled for to this warranty to be valid: •...
Page 16
Name and surname of owner ................... Address ………………………………………………………………………………………… Model ………………………………………………………………………………………… ………………… …………………………………. Date of sale Official stamp and signature of seller SAFETY INSPECTION CONTROL...
Page 17
Evaluation of Name of Service Signature and official Date of service technical condition Technician stamp...
Tecline donut 17Tecline donut 22Tecline donut 15 special editionTecline donut 22 special editionTecline donut 17 special editionTecline donut 22 special edition rebreather...
Show all
Need help?
Do you have a question about the Tecline Donut 15 and is the answer not in the manual?
Questions and answers