Do you have a question about the LS-575SPX and is the answer not in the manual?
Questions and answers
Carl Casimir
May 8, 2025
I need the electrical diagram for the connectors. Out of the three lamps I have, pins 1-2-3-4 are connected differently Can you please send me a diagram.
Kit with 2 x mylo daylight half x 1 led lights (4 pages)
Summary of Contents for Ikan LS-575SPX
Page 1
Quick Start Guide LS-575SPX 575 Watt HMI Super Spot Kit (Lightstar) What’s Included 1 x 575 Watt Light Fixture 1 x Barn Doors 1 x 575 Electronic Ballast 1 x 4’ Head to Ballast Cable 1 x Yoke 1 x 5 Insert Lens System (1x Spot, 1x Flood,...
1. Before connecting the fixture to the main power, set lights. Disconnect from main power before moving the fixture. Do not pull the main connecting wire from power source. Any product repairs must be performed by professional ikan personnel. Users must use correct wattage globes for fixture.
Product Description Lightstar 575W Super Spot HMI Lighting Fixture Step 1: 575W Super Spot cap Press the button on the back cover, while counterclockwise rotation of the cover, and then remove the back cover. Install the lamp in a porcelain seat, using a firm push to install the bulb.
Page 4
Product Accessories Lightstar 575W Super Spot HMI Lighting Fixture 5 Sets of Lens to adjust the Beam Degree and Angle No Lens Beam Angle: 5 Degree Spot Lens Beam Angle: 9 Degree Narrow Flood Beam Angle: 11 - 22 Degrees Flood Beam Angle: 21 - 41 Degrees Super Flood Beam Angle:...
32 Feet 696.7 FC 282.4 FC 78.4 FC 60.3 FC Optional Accessories Some other products that work well with the LS-575SPX available from Ikan include: KCP-703 Stage Clamp w/ 16mm Stud SW-04 Safety Wire CV600 Chrome Exposure / Spectrometer from UPRTek...
Need help?
Do you have a question about the LS-575SPX and is the answer not in the manual?
Questions and answers
I need the electrical diagram for the connectors. Out of the three lamps I have, pins 1-2-3-4 are connected differently Can you please send me a diagram.