Renkforce 1610095 Operating Instructions Manual page 45

"PLAYBACK SETUP"
Here, the following settings for UPnP playback are possible:
• Install the repeat function while playing music files (one or all titles will repeat play)
• Random repeat play order for playing music files
"RESUME WHEN POWER ON"
Here, you can establish whether the device should revert to the last operation mode before it was switched off or
should start by displaying the main menu.
"DIMMER"
Here, the display settings and brightness can be set.
This menu point can also be accessed directly via the DIMMER button (31).
• This mode determines whether the display should dim after a period of non-use.
• The brightness setting determines the display brightness for dimmed and undimmed states.
The display brightness in Standby mode can be set manually by turning the rotary dial (8).
"EQ"
Here, tone settings for various music genres can be set.
"BUFFER TIME"
Setting buffer time for internet radio playback.
For playback of internet radio stations, the data is cached to avoid breaks in performance due to poor data
connection or short interruptions to data connection. If you have a poor internet connection, raising the
buffer time can contribute to interruption-free playback performance.
"INFORMATION"
Here you can access information on your network and your internet radio.
This menu point can also be accessed directly via the INFO button (32).
"SOFTWARE UPDATE"
Here, you can look for software update on the net and install them where required.
"RESET TO DEFAULT"
Here you can restore the internet radio to its factory settings.
45