Summary of Contents for IRiver XB10
- Page 1 Bluetooth Headphone AMP XB10 INSTRUCTION BOOK www.iriver.co.kr © 1999~2016 IRIVER Limited. All rights reserved.
-
Page 2: What's Inside
What’s Inside ENGLISH The items listed herein are subject to change without prior notice for the purpose of performance improvement or due to the manufacturer's circumstance. XB10 Detachable clip Warranty & Micro-USB Instruction Cable Manual... -
Page 3: Overall Structure
Mounting the Clip Overall Structure 1. Please remove the Volume Control Key rubber cover on the Bluetooth Key Power/Lock Key bottom of the product. 2. Please insert one side of the clip first and then Play/Pause and Multi-key do the same Skip Next/Previous Song Key Status LED with the... -
Page 4: Turning The Device On/Off
Skip Next/Previous Song Key Balance Port Replays the next/previous song. You can listen to music by connecting with an earphone or headphone that support the Power Key balance cable (2.5 mm). To the right: You can turn the device on/off by pushing the key to the right side for Micro USB connector (only charging) about 3 seconds. -
Page 5: Bluetooth Pairing
If the last 4. Select this device on the list of devices device is not automatic reconnected, available for Bluetooth connection for find the XB10 from the desired device pairing. to establish a connection. Setting up iOS>Bluetooth>Select “XB10”... -
Page 6: Multi Pairing
] key once lightly. Press the ready. ] key once while the music is played. 2. Connect the first device (A) and XB10. If you want to start replaying again, press 3. Press the Bluetooth key to enter the it again. -
Page 7: Talking On The Phone
3. When making a phone call, you can cancel the call by pressing the [ ] key. The XB10 supports Distinctive Clear Technology (DCT), a digital noise removal Resetting technology, so that you can enjoy clearer and crispier sound. -
Page 8: Status Indicator Light
Recharging Status Indicator Light 1. You can recharge the product by inserting a Power on Micro USB cable that comes with the package The light turns blue and then flashes in the USB port located on its side. The indicator Power off shows a red light if it is being recharged and Flashing red light... -
Page 9: Specifications
Red light on during all operating conditions Audio Codec SBC, AAC, aptX, aptX HD Audio Port 2.5-mm Balanced, 3.5-mm If you keep pressing the XB10 Bluetooth Unbalanced key for 2 seconds on Bluetooth connection Size Ø50 x 12.3 mm (thickness) (circular) -
Page 10: Troubleshooting
Please check whether the device is charged. never turn it on. Wipe it with dry cloth, and get Charge with 5V 2A output adapter. it checked at the nearest iriver service center We recommend the use of the Micro USB cable that comes with the package. -
Page 11: Fcc Information
There is no warranty against events used in the examples are not based on data loss due to the use of this product. actual data. iriver has no intention to be associated with any company, institution, product, person, or incident through this instruction manual, FCC Information and no such inference should be made. - Page 12 FCC notification to users This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Need help?
Do you have a question about the XB10 and is the answer not in the manual?
Questions and answers