Philips 15MF227B/27 Service Manual page 15

32 SP_GAIN_CLR_YPBPR
33 SP_GAIN_CLR_HDMI
//PWM
34 VIDEO_PWM_NORMAL
35 VIDEO_PWM_MEDIUM
36 VIDEO_PWM_MAXIMUN
37 VGA_PWM_MIN
38 VGA_PWM_MAX
//YPbPr H/V Position
39 YPBPR_POS_H
40 YPBPR_POS_V
//Audio
41 AUD_GAIN_TV
42 AUD_GAIN_DTV
43 AUD_GAIN_HDMI
44 AUD_GAIN_SCART
45 AUD_HEADPHONE_VOL
46 AUD_BALANCE
//Tuner & Panel Id
47 TUNER ID
48 PANEL_ID
Smart picture control items: (values different by smart picture)
User Menu OSD:(Back-End)
Contrast
Brightness
Color
Sharpness
color temperature
Tint
Noise Reduction
Factory menu OSD
SP_MODE_PWM (when Dynamic contrast Off)
SP_MODE_3DNR (range 0 to 5)
5. Service Modes, Error Codes and Fault Finding
(when Dynamic contrast On, avoid too dark)
to limit PC brightness range
(value different by each timing)
interlace no effect, only progressive can be adjusted
volume different between audio source, for each
source volume to be the same
amplifier left and right volume
4 is Philips, 5 is Forward
value the same to CLI command
can be changed when factory mode
can be changed when factory mode
0~255
0~255
when Dynamic contrast turn
range PWM_NORMAL and
when Dynamic contrast turn
range PWM_NORMAL and
0~255
0~255
0~255
0~255
0~255
64~-64
64~-64
64~-64
64~-64
12~-64
-50~50 Press Left and Right to change value
4,5
TPM1.0U LA 15
Medium it reference
PWM_MEDIUM
Maximun it reference
PWM_MAXIMUN