Advertisement
Quick Links
Advertisement
Summary of Contents for AK Pro Technology Robot Light V1
- Page 1 Robot Light V1 User Manual...
- Page 3 Do not return this unit to your dealer without first contacting. Introduction: The Robot Light V1 is a DMX intelligent LED light. This light is light and compact which makes it a great piece for mobile DJ and clubs.
- Page 4 Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs by yourself, otherwise it will void your manufactures warranty. In the unlikely event your unit may require service please contact the manufacturer or your dealer. PLEASE recycle the shipping carton whenever possible.
- Page 5 Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage of your Robot Light V1. The Robot Light V1 is workable in 95-240V/50~60Hz. Because line voltage may vary from venue to venue, you should be sure your unit voltage matches the wall outlet voltage before attempting to operate you fixture.
- Page 6 1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller. 2. The The Robot Light V1 uses 10 / 12/14 CH channels to operate. Please see “DMX Values and Functions” for the DMX traits.
- Page 7 WHITE 000-255 Motor 000-255 Motor forward 000-255 Motor reversal 000-255 000-015 Auto1 016-025 Auto2 026-050 Auto3 051-075 Auto4 076-100 Auto Auto5 101-125 Auto6 126-150 Auto7 151-175 Auto8 176-200 Auto9 201-255 000-255 000-255 GREEN 000-255 BLUE 000-255 12CH WHITE 000-255 Motor 000-255 000-255(From slow Gradual (speed)
- Page 8 Motor 000-255 Strobe 000-255 Touch Buttons There are four touch buttons under the LED display: Menu, Down, Up, Enter. Normally, the LED will display the current DMX address code of the fixture. At this time, press Menu to choose the function you want to set up. Press and hold Up or Down to fast scrolling within the menu options.
- Page 9 0FF/ON Chinese Language Set English Version TRPRO-LB44IN1V.1-00 ON/OFF 00H00M00S Running time 00000Hour00Minute System Set Power 001-100% Temperature Operation mode Infrared remote control To control the fixture you must aim the controller at the front of the fixture . To used the remote control, you must first activate the fixture’s infrared receiver, To activate the fixture’s infrared receiver you should press the button MAST on the remote control.
- Page 10 Cleaning Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out periodically to optimize light output.
- Page 11 Product and shipping free of charges. (3) Lifetime after-sale service and technical support. You may connect 5 of the Robot Light V1 at most each time. The above policy is not valid if customers connect them to any other high power equipments without...
- Page 12 All our products have special mark on the fixture body. Customers are not allowed to open the fixtures. The above policy is not valid if customers open the fixtures by themselves without informing us first. Then customers can only get technical support only from us.
Need help?
Do you have a question about the Robot Light V1 and is the answer not in the manual?
Questions and answers