SERVICE INSPECTION 1.0 INTRODUCTION Thank you for choosing the Smirthwaite Combi Toileting Chair. The Combi Toileting Chair can be used as a supportive chair whilst at the same time providing numerous features to assist your child with their toileting needs.
• DO NOT fit parts or accessories of other manufacturers to this product unless authorised to do so in writing by G&S Smirthwaite Ltd. Failure to follow these instructions will not only invalidate the guarantee but could make the chair dangerous to use.
• Attach the back cushion to the seat side using the screws provided. The back cushion should be attached with the soft padded side facing forward, and the rounded top facing upwards. • The second seat side can now be attached. •...
Page 7
5.1.2 SEAT HEIGHT • To adjust seat height, reposition the leg outriggers (B) using the tool provided for this purpose. • There are 2 screws per leg. • Ensure all leg outriggers are set to the same height. • Ensure the screws are re-inserted and tightened when the desired height is achieved.
Page 8
5.1.3 ARMREST HEIGHT To adjust the height of the armrest • Loosen handwheels (D) • Slide armrest to desired position. • Tighten handwheels (D) when the armrest is set. • Repeat for both armrests – ensure armrests are set to the same height on both sides of the chair.
6.0 HOW TO USE The Combi Toileting Chair is a versatile product and can provides three modes of use FIGURE A FIGURE B FIGURE C 6.1 STANDARD CHAIR (FIGURE A) • In standard mode the Combi is perfect as a starter chair for children who have slight to mild disabilities.
The user should not be seated while the checks are carried out. 7.2 SERVICE INTERVAL The Combi Toileting Chair should be serviced every 3 years. Servicing must only be undertaken by a Smirthwaite service engineer, or by a Smirthwaite trained representative. Combi...
Page 11
• Use by a client who is extremely active, either voluntarily or involuntarily 7.4 EXTENDING NOMINAL SERVICE LIFE At Smirthwaite we are proud to produce products that have a reputation for quality and durability. We believe our products have the potential to provide benefits to our clients beyond the nominal service life documented above.
Page 12
• Smirthwaite will document and maintain a record of the original product configuration at the time of first sale • Smirthwaite will not be held responsible for any subsequent changes to this configuration unless authorized to do so in writing by G&S Smirthwaite Ltd •...
9.0 CONTINUOUS IMPROVEMENT G & S Smirthwaite Ltd are committed to continuous improvement to their product range. G&S Smirthwaite Ltd reserve the right to change the specification or material without prior notice. Combi ...
10.0 SERVICE INSPECTION 10.1 Product Information Model Size Date of Manufacture Serial Number Final Inspection 10.2 Service & inspection record form: Date Procedure Service Personnel Combi ...
Need help?
Do you have a question about the 7551 and is the answer not in the manual?
Questions and answers