Advertisement
Quick Links
Advertisement
Summary of Contents for S&S Global Net IPGW410
-
Page 1: User Manual
Broadband Internet Sharing Device(IPGW410) User Manual S & S Global Net Inc. - Page 2 Quick installation provides Quick & easy Administration for IPGW410’S Users, If something is wrong with IPGW410’S Installation refer to User Manual. Installation environment PC: IBM, Macintosh or Unix(Sun Linux) Which have a practicable Netscape Navigator 4.0 or later, or Microsoft Internet...
- Page 3 3. If you need, expand your network by connecting the hub to Uplink port of the IPGW410® 4. Connect the power adapter to the power port on the rear of the IPGW410 Configuring Your PCs to connect to the IPGW410®...
- Page 4 11. Type 192.168.10.1 in the New Gateway field then click the ‘ADD’ button, Click OK button After close your PCs windows, restart your PCs Basic set up and Configuring the IPGW410® 12. After the your PC restarts, open your Web browser Type http://192.168.10.1...
- Page 5 13. Leave the User Name field empty but type “admin” in the password field Click the OK button. You will see the IPGW410®’s the Basic set up page 14. The Basic setup screen is for using IPGW410® The Device Name/Domain Name remain unchanged...
- Page 6 Address of IPGW410® as it seen on the internal LAN. The default value is 192.168.10.1 for IP and 255.255.255.0 for Subnet Mask. WAN IP Address 1. If you are using dynamic IP address, Select the Obtain an IP Address Automatically 2.
- Page 7 Network Dynamic IP address user Click the Enable button to use DHCP Server Starting IP Address : Enter a starting IP Address number Number of DHCP Users : Enter a number of DHCP users Click the Submit button Network Static IP address users Click the Disable button Click the Submit button 16.
- Page 8 Type “PPPoE” in the Service name blank Click the Submit button Notice > The status get settuped Disconnected in the first setup but You will make it a rule to get settuped connected Static private IP Address Users Don’t need to setup PPPoE 17.You have completed the client settings...