Advertisement
Advertisement
Table of Contents
Summary of Contents for SEASENS Float Switch
- Page 1 Installation Manual Float Switch...
- Page 2 Installation Manual Table of Contents ..........................2 ETTING STARTED ............................2 NPACKING ............................2 OUNTING ............................3 AINTENANCE ......................... 3 ECHNICAL PECIFICATIONS ............................. 3 ISPOSAL ..................3 CTIVATION AND TEST IN THE LARM SYSTEM Page 1 of 5...
- Page 3 Mounting The Float Switch is placed a suitable place by the water tank, under the floor or where you want to be alarmed if water is present. The Float Switch is mounted with screws or with for instance heavy two-sided tape.
- Page 4 Activation and test in the Alarm system When the float switch is correctly installed and tested, it should be activated in the Alarm system. This is done in the SuperSail mobile app, where it is possible in the Alarm menu to specify which entry is to be connected to / activated in the Alarm system.
- Page 5 In the field ”Text” a short text is entered, that indicates the placement of the float switch. This text will be sent in Alarm SMS in case of activation of the float switch, when the alarm is on. It is therefore important that the text identifies the specific float switch in question.
Need help?
Do you have a question about the Float Switch and is the answer not in the manual?
Questions and answers