Summary of Contents for Winmate LDS210D
- Page 1 1U Rack LCD Drawer LDS Series User Guide Rev. 2.1 This specification is subject to change without notice. Manufacturer assumes no responsibility for any Error Contained herein.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Please read these instructions carefully before using the product and save for later reference. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Clean the product with a damp soft cloth. Do not use liquid or aerosol cleaners as it may cause permanent damage to the screen. -
Page 3: Table Of Contents
Contents 1. Introduction............................4 1.1. Overview........................... 4 1.2. Major Features .......................... 4 1.3. Outline Drawing ........................4 1.4. Notice............................5 1.5. Check List..........................5 2. Configurations and Installation......................6 2.1. Configurations .......................... 6 2.2. Installation ..........................6 3. LCD OSD Key Definition ........................8 3.1. -
Page 4: Introduction
1. Introduction 1.1. Overview The LDS series (LDS210D/LDS310D/LDS410D) are a series of compact devices, built-in a 15”, 17” or 19” LCD display, standard keyboard with numerical keypad, and heavy-duty touch pad to eliminate hardware redundancy and to increase cost efficiency. The 1U rack... -
Page 5: Notice
Rear Side (1 port) Rear Side (8 port) Rear Side (16 port) 1.4. Notice 1. Do not touch the LCD panel surface with sharp or hard objects. 2. Please ensure the LCD Drawer is securely in place. The surface for placing and fixing the LCD Drawer should be stable and level or mounted into a suitable cabinet. -
Page 6: Configurations And Installation
2. Configurations and Installation 2.1. Configurations The LDS serials rack LCD drawer supports 1 computer. The configuration is as shown in following figure. 2.2. Installation Step 1. Mount on Rack-Mount Chassis Mount the Rack Drawer LCD on Rack-Mount Chassis with screws. STEP1 Step 2. - Page 7 ends. LDS210/310/410 – 8/16P: ◆ Power down all computers which will be connected to your rack LCD monitor. ◆ Plug one end of the KVM expansion cable to the connectors at the rear of all the PC systems and the other end to the rack LCD monitor. ◆...
-
Page 8: Lcd Osd Key Definition
3. LCD OSD Key Definition 1. MENU Use this key to select the function you would like to adjust. 2. ADJUST Use this key to adjust the selected function for optimal viewing. 3. POWER SWITCH Use the power switch to turn the power ON or OFF. We recommend turning your PC system power on first, then the LCD monitor. - Page 9 V-POSITION Press "+" or "-" to move the image up or down on the screen. H-SCALING Press "+" or "-" to increase or decrease the Horizontal screen size. AUTO ADJUSTMENT Press "+" or "-" to have the monitor logic choose the best settings for the current input signal. WHITE BALANCE Press "+"...
-
Page 10: Kvm (Optional)
The 1U Rack LCD Drawer build-in KVM Switch enables a single keyboard, video monitor and mouse to control multiple computers at a time. This product supports one console and 8/16 computer ports. Product model number as follow table: Computer port number Size LDS210D-8P 15” LDS310D-8P 17” LDS410D-8P 19”... - Page 11 Field of Content: ADDR --- To show channel address POWER --- To indicate power status of computer Name --- To display computer name Field of Command: To edit name, press F1 To active Scan, press F2 To set System, press F3 To exit OSD, press ESC To accept Command, press ENTER Highlight Bar:...
- Page 12 --- Enter the channel name by using a-z, A-Z, 0-9, =-/, . ; SPACE --- Delete the letter by using Backspace --- Press Enter to accept or press ESC to exit without saving --- Press ESC to exit 4.1.6. Reset keyboard and Mouse --- Open OSD window --- Press F3 --- Move up and down arrow key to highlight the channel of RESET KEYBOARD AND...
-
Page 13: Selection By Hot Key
Note: this function is only available when using OSD to select computers or channels. 4.1.10. Set Password Note: This function is only used if you are running your system in secure mode, if you have forgotten your password; please return this device to the manufacturer. Only LDS210/310/410-8P offer this function. -
Page 14: Specifications
5. Specifications Item LDS210D LDS310D LDS410D Display Area(mm) 304.1(H) x 228.1(V) 337.9(H) x 270.3(V) 376.3(H) x 301.1(V) (15-inch diagonal) (17-inch diagonal) (19-inch diagonal) Pixel Pitch 0.297(H) x 0.297(V) 0.264(H) x 0.264(V) 0.294(H) x 0. 294(V) Number of Pixels 1024(H) x 768(V) -
Page 15: Disclaimer
7. Disclaimer We do not recommend the use of any ammonia or alcohol-based cleaners on the monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the rack LCD monitor. Seller will not be liable for damage resulting from use of any ammonia or alcohol-based cleaner. -
Page 16: Appendix
If you are unable to correct the fault by using this chart, stop using your monitor and contact your distributor or dealer for further assistance. 9. Appendix: 9.1 Supporting Resolution Modes: LDS210D(15”): LDS310D(17”)/LDS410D(19”): Mode Resolution H-Freq. (KHz) V-Freq.
Need help?
Do you have a question about the LDS210D and is the answer not in the manual?
Questions and answers