Table of Contents
Advertisement
Quick Links
Quick Start User Manual
1
Preparation
Check List
The product contains：
• One Xin.Bao Portal ECG Monitor Device
• One Micro-USB Charging Cable
• One Chest Strip
Chest Strip Wearing
• Please wet the two electrodes on the chest
strip before each use.
• While wearing, please put make sure the
electrodes are close enough to the heard
position as shown in the figure below；
• Buckle the device on to chest strip。
• NOTE: Please make sure the USB port of the
device is facing up (power button is down)
Adjust Chest Strip
• Before the first use, please adjust the length of
the chest strip to ensure the electrodes are
tightly attached to chest skin. The chest strip
should not move during exercise and should
not affect your normal breathing.
TIP：
Don't wet the whole chest strip while wearing
XIN.BAO Portable ECG Monitor
Install
Pre-requisite for Smart Phone Systems
• LifePing App only works on IOS and Android
phones. It requires Bluetooth Low Energy
(BLE 4.0) for communication. The minimum
phone OS version supported is IOs 7+ and
Android 4.3+. You can find all these
information in your phone's settings.
Download Xin.Bao APP
• Please scan the following QR code to
download XIN.BAO app. This code is
applicable for both iPhone and Android
phones.
• Alternatively, you can go to the following
address from your phone web browser to
download the app for both iPhone and
Android phone.
http://www.health-sensing.com/
TIP：
If you encounter downloading problem, please check
your mobile network connection.
• After the app is downloaded and installed
from the app stores, you can click the
XIN.BAO app icon to start it.
2
Xin.Bao
APP
Advertisement
Table of Contents
Summary of Contents for Uclan XIN.BAO
- Page 1 Pre-requisite for Smart Phone Systems The product contains： • LifePing App only works on IOS and Android • One Xin.Bao Portal ECG Monitor Device phones. It requires Bluetooth Low Energy • One Micro-USB Charging Cable (BLE 4.0) for communication. The minimum •...
- Page 2 • On the first use of the app, please choose to • Before starting your measurement, you will “JOIN XIN.BAO” to register. An valid email need to register your XIN.BAO device to the app. address is required to create your XIN. BAO Please make sure that Bluetooth on your phone account.
- Page 3 Instruction for Using XIN.BAO App ECG Measurement ECG Records • Open the ECG measurement page through • Open ECG Records Page through app main app main menu (①); Click the start button menu(①). It shows all saved ECG records of （“arrow”...
- Page 4 De-register Device: Remove device from the • app. Once a device is deregistered, you are not able to connect to it till it’s registered again. TIP： While XIN.BAO device is under RESET, please DO NOT operate it or switch it off.
- Page 5 Instruction for Using XIN.BAO App Activity Tracking Setting • Open activity tracking page through app main • Open Setting page through main menu(①). This page displays your historical menu(①). You can set the key parameters of heart rate and activity data. You can browse the app using setting page.
- Page 6 Light Indicators Initialisation: Device Reset: Red Light On ， Green Light Flashes: Red Light Flashes Quickly：After the device is powered on, red light flashes quickly for a Please don’t turn off your device while short period of time. It indicates the device in device is resetting.
Need help?
Do you have a question about the XIN.BAO and is the answer not in the manual?
Questions and answers