Table of Contents
Advertisement
en
ELECTRICAL CONNECTIONS
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A 13amp fused
plug, to change a fuse in this type of plug use an A .S .T .A . approved fuse
to BS 1362 type and proceed as follows:
B
Socket outlet / plug
If the fitted plug is not suitable for your socket outlet, contact After-
Sales Service for further instruction. Do not attempt to change the plug
yourself. This procedure needs to be carried out by a qualified technician
in compliance with the manufacturer's instructions and current standard
safety regulations.
CORRECT USE
• Turn the appliance off and unplug from the supply outlet when not in
use, before cleaning, assembly, disassembly or interacting with any
accessory.
• Do not leave the appliance unattended while is operating.
• Ensure that the switch is free or obstructions and the lid is firmly closed.
The kettle will not turn off if the switch is constrained or if the lid is
open.
• Do not operate the appliance empty to avoid damaging the heating
elements.
• The max capacity of the kettle is 1.7L. Do not add water over the
maximum level, as it may spill out of the spout when boiling. Ensure
that the lid is firmly in place before connecting the plug into a power
unit.
6 6
1. Remove the fuse cover (A) and fuse (B)
2. Fit replacement 13A fuse into fuse cover
A
3. Refit both into plug
Important:
The fuse cover must be refitted when changing
a fuse and if the fuse cover is lost, the plug must
not be used until a correct replacement is fitted.
Correct replacements are identified by the colour
insert or the colour embossed in words on the
base of the plug. Replacement fuse covers are
available from your local electrical store.
Advertisement
Table of Contents
