Page 1
Installation Guide Y5Home Smart Motion or Door...
Page 2
• Check Add Door/Motion Sensor check box to add Door/Motion Sensor respectively • Add 16 char sensor ID in Door/Motion Sensor Id field (You can see 16 char module id address on Y5 sensor box as a barcode) E.g. 01234567ABCDEF01 • Enter Door/Motion Sensor name and select other parameters as per your requirements •...
Page 3
• Door/Motion Sensor list will be displayed on top of the page with red icon • Now you can install the Y5 motion/door sensor on wall surface or door. • It will disappear after few seconds once you go to another tab and come again on “CONFIG SENSOR”...
Page 4
Neutral Phase Phase Y5 Sensor Neutral For questions or clarifications write to us at support@y5home.com...